Il 25/01/21 11:40, Hans Verkuil ha scritto:
On 18/01/2021 18:45, AngeloGioacchino Del Regno wrote:Il 18/01/21 18:21, Stanimir Varbanov ha scritto:Hi Angelo, Thanks for the patch! On 1/15/21 8:52 PM, AngeloGioacchino Del Regno wrote:Add the SDM660 DT compatible and its resource structure, also including support for the Venus pmdomains, in order to support the Venus block in SDM630, SDM636, SDM660 and SDA variants. This SoC features Venus 4.4 (HFI3XX), with one vcodec used for both encoding and decoding, switched on through two GDSCs. The core clock for this Venus chip is powered by the RPM VDD_CX power domain. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx> --- drivers/media/platform/qcom/venus/core.c | 66 ++++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c index bdd293faaad0..83ca86a63241 100644 --- a/drivers/media/platform/qcom/venus/core.c +++ b/drivers/media/platform/qcom/venus/core.c @@ -565,6 +565,71 @@ static const struct venus_resources sdm845_res_v2 = { .fwname = "qcom/venus-5.2/venus.mdt", };+static const struct freq_tbl sdm660_freq_table[] = {+ { 0, 518400000 }, + { 0, 441600000 }, + { 0, 404000000 }, + { 0, 320000000 }, + { 0, 269330000 }, + { 0, 133330000 }, +}; + +static const struct reg_val sdm660_reg_preset[] = { + { 0x80010, 0x001f001f }, + { 0x80018, 0x00000156 }, + { 0x8001C, 0x00000156 }, +}; + +static const struct bw_tbl sdm660_bw_table_enc[] = { + { 979200, 1044000, 0, 2446336, 0 }, /* 4k UHD @ 30 */ + { 864000, 887000, 0, 2108416, 0 }, /* 720p @ 240 */ + { 489600, 666000, 0, 1207296, 0 }, /* 1080p @ 60 */ + { 432000, 578000, 0, 1058816, 0 }, /* 720p @ 120 */ + { 244800, 346000, 0, 616448, 0 }, /* 1080p @ 30 */ + { 216000, 293000, 0, 534528, 0 }, /* 720p @ 60 */ + { 108000, 151000, 0, 271360, 0 }, /* 720p @ 30 */ +}; + +static const struct bw_tbl sdm660_bw_table_dec[] = { + { 979200, 2365000, 0, 1892000, 0 }, /* 4k UHD @ 30 */ + { 864000, 1978000, 0, 1554000, 0 }, /* 720p @ 240 */ + { 489600, 1133000, 0, 895000, 0 }, /* 1080p @ 60 */ + { 432000, 994000, 0, 781000, 0 }, /* 720p @ 120 */ + { 244800, 580000, 0, 460000, 0 }, /* 1080p @ 30 */ + { 216000, 501000, 0, 301000, 0 }, /* 720p @ 60 */ + { 108000, 255000, 0, 202000, 0 }, /* 720p @ 30 */ +}; + +static const struct venus_resources sdm660_res = { + .freq_tbl = sdm660_freq_table, + .freq_tbl_size = ARRAY_SIZE(sdm660_freq_table), + .reg_tbl = sdm660_reg_preset, + .reg_tbl_size = ARRAY_SIZE(sdm660_reg_preset), + .bw_tbl_enc = sdm660_bw_table_enc, + .bw_tbl_enc_size = ARRAY_SIZE(sdm660_bw_table_enc), + .bw_tbl_dec = sdm660_bw_table_dec, + .bw_tbl_dec_size = ARRAY_SIZE(sdm660_bw_table_dec), + .clks = {"core", "iface", "bus_throttle", "bus" }, + .clks_num = 4, + .vcodec0_clks = { "vcodec0_core" }, + .vcodec_clks_num = 1, + .vcodec_pmdomains = { "venus", "vcodec0" }, + .vcodec_pmdomains_num = 2, + .opp_pmdomain = (const char *[]) { "cx", NULL }, + .vcodec_num = 1, + .max_load = 1036800, + .hfi_version = HFI_VERSION_3XX, + .vmem_id = VIDC_RESOURCE_NONE, + .vmem_size = 0, + .vmem_addr = 0, + .cp_start = 0, + .cp_size = 0x79000000, + .cp_nonpixel_start = 0x1000000, + .cp_nonpixel_size = 0x28000000, + .dma_mask = 0xd9000000 - 1, + .fwname = "qcom/venus-4.4/venus.mdt",Did you try venus-4.2 firmware from linux-firmware tree [1] ?No I haven't.. and I can't... my Sony devices (but I think that this is a practice of all OEMs/ODMs) are using a Sony signed venus firmware, so I am totally limited to use the firmware that comes with the device. Besides that, the version is still different so, even if I had any possibility to try that, I don't think that it would work anyway...
Hello!
I'm a bit confused. "qcom/venus-4.4/venus.mdt" is the Sony signed FW?
In my case it is, but this follows the generic firmware path as was done for all the other Venus firmwares, so my code is not pointing at Sony specific things, but just generic ones. Every Qualcomm-powered consumer device (smartphones, tablets etc) have got a double sigcheck: one for qcom, one for OEM specific and most of the times the TZ is configured to accept only firmwares that also have the OEM signature. This is not true for all the firmwares - for example, Adreno has this mechanism only for the ZAP part - but unfortunately I'm not aware of any consumer device accepting a Venus firmware with the "generic" Qualcomm signature only (so - without the OEM signature). Short answer: 1. qcom/venus-4.4/venus.mdt is a generic firmware for Venus 2. 99% of the people needs a different firmware for signature issues
This patch can't be merged unless there is a corresponding firmware available in linux-firmware. Is the current 4.2 firmware in linux-firmware signed by Qualcomm? Can they provided 4.4 firmware as well?
If there is such issue, then maybe we should do "something" about it: I would then propose to remove all references to fwname and just get this done in DT, where every qcom board already specifies its own path for its own firmware. In any case, the issue that you're raising here has been raised multiple times on LKML, I don't precisely remember, but I recall seeing this for something like 4 years (or even more) being raised every now and then...
I have no idea how this works for the venus driver, but I hope Stanimir does.
As far as I've understood, this driver just uses the firmware which
path is hardcoded in fwname, even though at this point I would like
to get an opinion from Stanimir.
Would you be ok if we start parsing firmware-name from DT for this
driver? The flow would be something like:
Is firmware-name DT property present?
Yes -> Use FW path from firmware-name property
No -> Use the FW path from the fwname field of struct
venus_resources
This is a common flow in at least freedreno and remoteproc (modem).
-- Angelo
Regards, Hans+}; + static const struct freq_tbl sc7180_freq_table[] = { { 0, 500000000 }, { 0, 434000000 }, @@ -613,6 +678,7 @@ static const struct venus_resources sc7180_res = { static const struct of_device_id venus_dt_match[] = { { .compatible = "qcom,msm8916-venus", .data = &msm8916_res, }, { .compatible = "qcom,msm8996-venus", .data = &msm8996_res, }, + { .compatible = "qcom,sdm660-venus", .data = &sdm660_res, }, { .compatible = "qcom,sdm845-venus", .data = &sdm845_res, }, { .compatible = "qcom,sdm845-venus-v2", .data = &sdm845_res_v2, }, { .compatible = "qcom,sc7180-venus", .data = &sc7180_res, },Reviewed-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>Thank you! - Angelo
