[PATCH v2] arm64: dts: ti: k3-j7200-main: Add support for higher speed modes in MMCSD subsystems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The following speed modes are now supported in J7200 SoC,
- HS200 and HS400 modes at 1.8 V card voltage, in MMCSD0 subsystem [1].
- UHS-I speed modes in MMCSD1 subsystem [1].

Set respective tags in sdhci0 and remove no-1-8-v tag from sdhci1 device
tree nodes.

[1] - section 12.3.6.1.1 MMCSD Features, in
      https://www.ti.com/lit/ug/spruiu1a/spruiu1a.pdf

Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx>
---

performance test logs using EXT4 filesystem for eMMC HS400 speed mode,
https://pastebin.ubuntu.com/p/JnPs8DxV58/

performance test logs using EXT4 filesystem for SD SDR104 speed mode,
https://pastebin.ubuntu.com/p/KPGzBz8YwC/

Changes since v1:
- Squashed the two patches into one
- added performance logs for the above mentioned speed modes

 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 4cc2e9094d0e..4b3d0b5739e8 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -517,6 +517,8 @@
 		ti,trm-icp = <0x8>;
 		bus-width = <8>;
 		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
 		dma-coherent;
 	};
 
@@ -534,7 +536,6 @@
 		ti,otap-del-sel-sdr50 = <0xc>;
 		ti,otap-del-sel-sdr104 = <0x5>;
 		ti,otap-del-sel-ddr50 = <0xc>;
-		no-1-8-v;
 		dma-coherent;
 	};
 
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux