Re: [PATCH 1/3] drivers: firmware: Add Pdi load API support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 18, 2021 at 08:13:16AM +0530, Nava kishore Manne wrote:
> This patch adds load pdi api support to enable pdi/partial loading from
> linux. Programmable Device Image (PDI) is combination of headers, images
> and bitstream files to be loaded. Partial PDI is partial set of image/
> images to be loaded.
> 
> Signed-off-by: Nava kishore Manne <nava.manne@xxxxxxxxxx>
> ---
>  drivers/firmware/xilinx/zynqmp.c     | 17 +++++++++++++++++
>  include/linux/firmware/xlnx-zynqmp.h |  9 +++++++++
>  2 files changed, 26 insertions(+)
> 
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index 7eb9958662dd..a466225b9f9e 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -897,6 +897,23 @@ int zynqmp_pm_set_requirement(const u32 node, const u32 capabilities,
>  }
>  EXPORT_SYMBOL_GPL(zynqmp_pm_set_requirement);
>  
> +/**
> + * zynqmp_pm_load_pdi - Load and process pdi
Nit: Is it pdi or PDI. Pick one :)
> + * @src:       Source device where PDI is located
> + * @address:   Pdi src address
> + *
> + * This function provides support to load pdi from linux
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +int zynqmp_pm_load_pdi(const u32 src, const u64 address)
> +{
> +	return zynqmp_pm_invoke_fn(PM_LOAD_PDI, src,
> +				   lower_32_bits(address),
> +				   upper_32_bits(address), 0, NULL);
> +}
> +EXPORT_SYMBOL_GPL(zynqmp_pm_load_pdi);
> +
>  /**
>   * zynqmp_pm_aes - Access AES hardware to encrypt/decrypt the data using
>   * AES-GCM core.
> diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
> index 2a0da841c942..87114ee645b1 100644
> --- a/include/linux/firmware/xlnx-zynqmp.h
> +++ b/include/linux/firmware/xlnx-zynqmp.h
> @@ -52,6 +52,9 @@
>  #define	ZYNQMP_PM_CAPABILITY_WAKEUP	0x4U
>  #define	ZYNQMP_PM_CAPABILITY_UNUSABLE	0x8U
>  
> +/* Loader commands */
> +#define PM_LOAD_PDI	0x701
> +
>  /*
>   * Firmware FPGA Manager flags
>   * XILINX_ZYNQMP_PM_FPGA_FULL:	FPGA full reconfiguration
> @@ -354,6 +357,7 @@ int zynqmp_pm_write_pggs(u32 index, u32 value);
>  int zynqmp_pm_read_pggs(u32 index, u32 *value);
>  int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype);
>  int zynqmp_pm_set_boot_health_status(u32 value);
> +int zynqmp_pm_load_pdi(const u32 src, const u64 address);
>  #else
>  static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
>  {
> @@ -538,6 +542,11 @@ static inline int zynqmp_pm_set_boot_health_status(u32 value)
>  {
>  	return -ENODEV;
>  }
> +
> +static inline int zynqmp_pm_load_pdi(const u32 src, const u64 address)
> +{
> +	return -ENODEV;
> +}
>  #endif
>  
>  #endif /* __FIRMWARE_ZYNQMP_H__ */
> -- 
> 2.18.0
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux