Re: [alsa-devel] [PATCH v3] ASoC: tas2552: Support TI TAS2552 Amplifier

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 07/02/2014 05:02 PM, Dan Murphy wrote:
> On 07/02/2014 08:47 AM, Daniel Mack wrote:
>> Hi Dan,
>>
>> On 07/02/2014 03:30 PM, Dan Murphy wrote:
>>> +	if (np) {
>>> +		data->power_gpio = of_get_named_gpio(np, "enable-gpio", 0);
>>> +	} else if (pdata) {
>>> +		data->power_gpio = pdata->enable_gpio;
>>> +	} else {
>>> +		dev_err(dev, "Platform or dev tree data not set\n");
>>> +		return -ENODEV;
>>> +	}
>> New code for GPIO handling should use the new gpiod interface.
>> See include/linux/gpio/consumer.h, or the sta350 codec driver.
> 
> OK good catch.  I will look into it.
> 
> Does the gpiod interface handle both pdata as well as dt?

Yes, please refer to Documentation/gpio/board.txt.

>> For that to work, you also need to rename the property to
>> 'enable-gpios', even though there's only one.
> 
> I am looking for that restriction in the code.  But don't see it.
> Will dig some more here.

Ah, dd34c37aa3 ("gpio: of: Allow -gpio suffix for property names")
changed that, so both variants are now supported.



Daniel


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux