On Fri, Jan 22, 2021 at 10:52:18AM +0100, Michal Simek wrote: > Hi, > > On 1/22/21 10:24 AM, Corentin Labbe wrote: > > Hello > > > > With at least qemu 5.1.0 (and later), the xlnx-zcu102 machine boot lead to a panic due to missing console. > > qemu-system-aarch64 -kernel Image -nographic -machine xlnx-zcu102 -device ide-hd,drive=lavatest -serial mon:stdio -serial null -append 'earlycon=cdns,mmio,0xFF000000,115200n8 console=ttyPS0 root=/dev/ram0 ip=dhcp' -dtb zynqmp-zcu102-rev1.0.dtb -m 2048 -nic user,model=cadence_gem,mac=52:54:00:12:34:58 -drive format=qcow2,file=disk.img,if=none,id=lavatest -initrd rootfs.cpio.gz > > [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] > > [ 0.000000] Linux version 5.5.0-rc1-00004-g9c8a47b484ed (clabbe@arnold) (gcc version 7.5.0 (Linaro GCC 7.5-2019.12)) #17 SMP PREEMPT Fri Jan 22 09:19:31 UTC 2021 > > [ 0.000000] Machine model: ZynqMP ZCU102 Rev1.0 > > [ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff000000 (options '115200n8') > > [ 0.000000] printk: bootconsole [cdns0] enabled > > [ 0.000000] efi: Getting EFI parameters from FDT: > > [ 0.000000] efi: UEFI not found. > > [ 0.000000] cma: Reserved 32 MiB at 0x000000007e000000 > > [ 0.000000] NUMA: No NUMA configuration found > > [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff] > > [ 0.000000] NUMA: NODE_DATA [mem 0x7dbe0100-0x7dbe1fff] > > [ 0.000000] Zone ranges: > > [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] > > [ 0.000000] DMA32 [mem 0x0000000040000000-0x000000007fffffff] > > [ 0.000000] Normal empty > > [ 0.000000] Movable zone start for each node > > [ 0.000000] Early memory node ranges > > [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] > > [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] > > [ 0.000000] psci: probing for conduit method from DT. > > [ 0.000000] psci: PSCIv0.2 detected in firmware. > > [ 0.000000] psci: Using standard PSCI v0.2 function IDs > > [ 0.000000] psci: Trusted OS migration not required > > [ 0.000000] percpu: Embedded 22 pages/cpu s53016 r8192 d28904 u90112 > > [ 0.000000] Detected VIPT I-cache on CPU0 > > [ 0.000000] CPU features: detected: ARM erratum 845719 > > [ 0.000000] CPU features: detected: ARM erratum 843419 > > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 > > [ 0.000000] Policy zone: DMA32 > > [ 0.000000] Kernel command line: earlycon=cdns,mmio,0xFF000000,115200n8 console=ttyPS0 root=/dev/ram0 ip=dhcp > > [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) > > [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) > > [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off > > [ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB) > > [ 0.000000] Memory: 1907172K/2097152K available (12092K kernel code, 1896K rwdata, 6640K rodata, 5120K init, 456K bss, 157212K reserved, 32768K cma-reserved) > > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > > [ 0.000000] rcu: Preemptible hierarchical RCU implementation. > > [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. > > [ 0.000000] Tasks RCU enabled. > > [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. > > [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 > > [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 > > [ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x454 with crng_init=0 > > [ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt). > > [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns > > [ 0.000118] sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns > > [ 0.006458] Console: colour dummy device 80x25 > > [ 0.008026] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=250000) > > [ 0.008182] pid_max: default: 32768 minimum: 301 > > [ 0.009157] LSM: Security Framework initializing > > [ 0.010014] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) > > [ 0.010106] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) > > [ 0.060263] ASID allocator initialised with 32768 entries > > [ 0.067849] rcu: Hierarchical SRCU implementation. > > [ 0.079370] EFI services will not be available. > > [ 0.088702] smp: Bringing up secondary CPUs ... > > [ 0.118904] Detected VIPT I-cache on CPU1 > > [ 0.119921] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] > > [ 0.156284] Detected VIPT I-cache on CPU2 > > [ 0.156514] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] > > [ 0.189310] Detected VIPT I-cache on CPU3 > > [ 0.189472] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] > > [ 0.189921] smp: Brought up 1 node, 4 CPUs > > [ 0.190504] SMP: Total of 4 processors activated. > > [ 0.190633] CPU features: detected: 32-bit EL0 Support > > [ 0.190817] CPU features: detected: CRC32 instructions > > [ 0.297754] CPU: All CPU(s) started at EL1 > > [ 0.298034] alternatives: patching kernel code > > [ 0.313974] devtmpfs: initialized > > [ 0.331444] KASLR disabled due to lack of seed > > [ 0.334720] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns > > [ 0.334884] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) > > [ 0.338030] pinctrl core: initialized pinctrl subsystem > > [ 0.346728] thermal_sys: Registered thermal governor 'step_wise' > > [ 0.346790] thermal_sys: Registered thermal governor 'power_allocator' > > [ 0.347676] DMI not present or invalid. > > [ 0.351563] NET: Registered protocol family 16 > > [ 0.365080] DMA: preallocated 256 KiB pool for atomic allocations > > [ 0.365197] audit: initializing netlink subsys (disabled) > > [ 0.367450] audit: type=2000 audit(0.352:1): state=initialized audit_enabled=0 res=1 > > [ 0.373249] cpuidle: using governor menu > > [ 0.374322] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. > > [ 0.377901] Serial: AMBA PL011 UART driver > > [ 0.409786] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages > > [ 0.409852] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages > > [ 0.409899] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages > > [ 0.409943] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages > > [ 0.427753] cryptd: max_cpu_qlen set to 1000 > > [ 0.451024] ACPI: Interpreter disabled. > > [ 0.455411] iommu: Default domain type: Translated > > [ 0.460553] vgaarb: loaded > > [ 0.461653] SCSI subsystem initialized > > [ 0.463668] usbcore: registered new interface driver usbfs > > [ 0.464015] usbcore: registered new interface driver hub > > [ 0.464233] usbcore: registered new device driver usb > > [ 0.465642] pps_core: LinuxPPS API ver. 1 registered > > [ 0.465719] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> > > [ 0.465913] PTP clock support registered > > [ 0.466536] EDAC MC: Ver: 3.0.0 > > [ 0.470918] FPGA manager framework > > [ 0.480307] clocksource: Switched to clocksource arch_sys_counter > > [ 0.481151] VFS: Disk quotas dquot_6.6.0 > > [ 0.481303] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > > [ 0.483302] pnp: PnP ACPI: disabled > > [ 0.499697] NET: Registered protocol family 2 > > [ 0.503466] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) > > [ 0.503600] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) > > [ 0.503883] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) > > [ 0.504340] TCP: Hash tables configured (established 16384 bind 16384) > > [ 0.505760] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) > > [ 0.505955] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) > > [ 0.509700] NET: Registered protocol family 1 > > [ 0.512672] RPC: Registered named UNIX socket transport module. > > [ 0.512748] RPC: Registered udp transport module. > > [ 0.512798] RPC: Registered tcp transport module. > > [ 0.512873] RPC: Registered tcp NFSv4.1 backchannel transport module. > > [ 0.513000] PCI: CLS 0 bytes, default 64 > > [ 0.518640] Trying to unpack rootfs image as initramfs... > > [ 1.561069] Freeing initrd memory: 24492K > > [ 1.563539] hw perfevents: no interrupt-affinity property for /pmu, guessing. > > [ 1.566112] hw perfevents: enabled with armv8_pmuv3 PMU driver, 5 counters available > > [ 1.566604] kvm [1]: HYP mode not available > > [ 2.168380] Initialise system trusted keyrings > > [ 2.170604] workingset: timestamp_bits=44 max_order=19 bucket_order=0 > > [ 2.182859] squashfs: version 4.0 (2009/01/31) Phillip Lougher > > [ 2.185289] NFS: Registering the id_resolver key type > > [ 2.185516] Key type id_resolver registered > > [ 2.185568] Key type id_legacy registered > > [ 2.185735] nfs4filelayout_init: NFSv4 File Layout Driver Registering... > > [ 2.186423] 9p: Installing v9fs 9p2000 file system support > > [ 2.216137] Key type asymmetric registered > > [ 2.216526] Asymmetric key parser 'x509' registered > > [ 2.216938] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) > > [ 2.217290] io scheduler mq-deadline registered > > [ 2.217490] io scheduler kyber registered > > [ 2.238034] EINJ: ACPI disabled. > > [ 2.256746] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > > [ 2.262019] SuperH (H)SCI(F) driver initialized > > [ 2.262788] msm_serial: driver initialized > > [ 2.266149] cacheinfo: Unable to detect cache hierarchy for CPU 0 > > [ 2.290568] brd: module loaded > > [ 2.305751] loop: module loaded > > [ 2.314997] libphy: Fixed MDIO Bus: probed > > [ 2.315445] tun: Universal TUN/TAP device driver, 1.6 > > [ 2.317611] macb ff0e0000.ethernet: failed to get macb_clk (-517) > > [ 2.318012] thunder_xcv, ver 1.0 > > [ 2.318108] thunder_bgx, ver 1.0 > > [ 2.318192] nicpf, ver 1.0 > > [ 2.319004] hclge is initializing > > [ 2.319116] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version > > [ 2.319168] hns3: Copyright (c) 2017 Huawei Corporation. > > [ 2.319475] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k > > [ 2.319522] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. > > [ 2.319625] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k > > [ 2.319676] igb: Copyright (c) 2007-2014 Intel Corporation. > > [ 2.319784] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k > > [ 2.319841] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. > > [ 2.320480] sky2: driver version 1.30 > > [ 2.321671] VFIO - User Level meta-driver version: 0.3 > > [ 2.324375] dwc3 fe200000.usb: Failed to get clk 'ref': -2 > > [ 2.324580] dwc3 fe200000.usb: this is not a DesignWare USB3 DRD Core > > [ 2.326494] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > > [ 2.326582] ehci-pci: EHCI PCI platform driver > > [ 2.326765] ehci-platform: EHCI generic platform driver > > [ 2.326969] ehci-orion: EHCI orion driver > > [ 2.327149] ehci-exynos: EHCI EXYNOS driver > > [ 2.327338] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > > [ 2.327450] ohci-pci: OHCI PCI platform driver > > [ 2.327632] ohci-platform: OHCI generic platform driver > > [ 2.327841] ohci-exynos: OHCI EXYNOS driver > > [ 2.333183] i2c /dev entries driver > > [ 2.340433] CPUidle PSCI: Invalid PSCI power state 0x40000000 > > [ 2.340503] CPUidle PSCI: CPU 0 failed to PSCI idle > > [ 2.341032] sdhci: Secure Digital Host Controller Interface driver > > [ 2.341081] sdhci: Copyright(c) Pierre Ossman > > [ 2.341664] Synopsys Designware Multimedia Card Interface Driver > > [ 2.342891] sdhci-pltfm: SDHCI platform and OF driver helper > > [ 2.344309] sdhci-arasan ff170000.mmc: clk_ahb clock not found. > > [ 2.347585] ledtrig-cpu: registered to indicate activity on CPUs > > [ 2.350355] usbcore: registered new interface driver usbhid > > [ 2.350408] usbhid: USB HID core driver > > [ 2.355763] NET: Registered protocol family 17 > > [ 2.357107] 9pnet: Installing 9P2000 support > > [ 2.357402] Key type dns_resolver registered > > [ 2.358493] registered taskstats version 1 > > [ 2.358570] Loading compiled-in X.509 certificates > > [ 2.366581] macb ff0e0000.ethernet: failed to get macb_clk (-517) > > [ 2.368578] sdhci-arasan ff170000.mmc: clk_ahb clock not found. > > [ 2.380780] macb ff0e0000.ethernet: failed to get macb_clk (-517) > > [ 2.382995] sdhci-arasan ff170000.mmc: clk_ahb clock not found. > > [ 2.387684] hctosys: unable to open rtc device (rtc0) > > [ 14.675537] Warning: unable to open an initial console. > > [ 14.696554] Freeing unused kernel memory: 5120K > > [ 14.697256] Run /init as init process > > [ 14.757187] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 > > [ 14.757393] CPU: 0 PID: 1 Comm: init Not tainted 5.5.0-rc1-00004-g9c8a47b484ed #17 > > [ 14.757452] Hardware name: ZynqMP ZCU102 Rev1.0 (DT) > > [ 14.757660] Call trace: > > [ 14.757705] dump_backtrace+0x0/0x1a0 > > [ 14.757790] show_stack+0x14/0x20 > > [ 14.757827] dump_stack+0xbc/0x104 > > [ 14.757855] panic+0x16c/0x37c > > [ 14.757880] do_exit+0x97c/0x980 > > [ 14.757905] do_group_exit+0x44/0xa0 > > [ 14.757932] __arm64_sys_exit_group+0x14/0x18 > > [ 14.757968] el0_svc_common.constprop.2+0x64/0x160 > > [ 14.758002] el0_svc_handler+0x20/0x80 > > [ 14.758029] el0_sync_handler+0xe4/0x188 > > [ 14.758057] el0_sync+0x140/0x180 > > [ 14.758265] SMP: stopping secondary CPUs > > [ 14.758640] Kernel Offset: disabled > > [ 14.758792] CPU features: 0x00002,24002004 > > [ 14.758844] Memory Limit: none > > [ 14.759190] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 ]--- > > > > I have bisect it; > > git bisect start > > # good: [937381741d02cc6594477c593b2f3a087b3a0bc1] Linux 5.5.19 > > git bisect good 937381741d02cc6594477c593b2f3a087b3a0bc1 > > # bad: [61aba373f5708f2aebc3f72078e51949a068aa6f] Linux 5.6.19 > > git bisect bad 61aba373f5708f2aebc3f72078e51949a068aa6f > > # good: [d5226fa6dbae0569ee43ecfc08bdcd6770fc4755] Linux 5.5 > > git bisect good d5226fa6dbae0569ee43ecfc08bdcd6770fc4755 > > # good: [ccaaaf6fe5a5e1fffca5cca0f3fc4ec84d7ae752] Merge tag 'mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/daveh/x86-mpx > > git bisect good ccaaaf6fe5a5e1fffca5cca0f3fc4ec84d7ae752 > > # bad: [6f08e98d62799e53c89dbf2c9a49d77e20ca648c] net: phy: restore mdio regs in the iproc mdio driver > > git bisect bad 6f08e98d62799e53c89dbf2c9a49d77e20ca648c > > # good: [5b21115414f5b5220e7ab3ca7f5d2c1396f11854] Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu > > git bisect good 5b21115414f5b5220e7ab3ca7f5d2c1396f11854 > > # bad: [d030a0dd01306d45569c6a4449dee603f994744a] Merge tag 'ti-k3-soc-for-v5.6-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt > > git bisect bad d030a0dd01306d45569c6a4449dee603f994744a > > # good: [78c47feaff0597ac5567466d937e42d3bde52a29] Merge tag 'imx-dt-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt > > git bisect good 78c47feaff0597ac5567466d937e42d3bde52a29 > > # good: [2e04d1bd540c849495c6f50d3c8086be824bd4e5] Merge tag 'qcom-arm64-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt > > git bisect good 2e04d1bd540c849495c6f50d3c8086be824bd4e5 > > # good: [55a03ac8374d1f6ad149624419777bfbf077dc42] Merge tag 'at91-5.6-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt > > git bisect good 55a03ac8374d1f6ad149624419777bfbf077dc42 > > # bad: [5a25e646902f8bfd97379b0b385d93c93cb5b94e] arm64: zynqmp: Add label property to all ina226 on zcu106 > > git bisect bad 5a25e646902f8bfd97379b0b385d93c93cb5b94e > > # bad: [4426df7c8dc2eb9a1438418a3cbeeff41ef5c097] arm64: zynqmp: Turn comment to gpio-line-names > > git bisect bad 4426df7c8dc2eb9a1438418a3cbeeff41ef5c097 > > # bad: [4406486805bffbf245473e6111e2d7984550846e] arm64: dts: xilinx: Remove dtsi for fixed clock > > git bisect bad 4406486805bffbf245473e6111e2d7984550846e > > # good: [a6764cbda6c64b76a3f7511c099fc1a0accca5b0] arm64: dts: zynqmp: Use decimal values for drm-clock properties > > git bisect good a6764cbda6c64b76a3f7511c099fc1a0accca5b0 > > # bad: [9c8a47b484ed8d7b06b4ca0032e93c458c7b931e] arm64: dts: xilinx: Add the clock nodes for zynqmp > > git bisect bad 9c8a47b484ed8d7b06b4ca0032e93c458c7b931e > > # good: [df906cf54bd54dbc87efb5129ce38e3ca9e7d329] arm64: zynqmp: Add dr_mode property to usb node > > git bisect good df906cf54bd54dbc87efb5129ce38e3ca9e7d329 > > # first bad commit: [9c8a47b484ed8d7b06b4ca0032e93c458c7b931e] arm64: dts: xilinx: Add the clock nodes for zynqmp > > > > Regards > > > > Do you have uart driver enabled? And do you have uart IP modeled in > Qemu? I can't see driver be probed. > Anyway the commit suggest that qemu has any issue with getting > information about CLK from firmware. Not sure how this is modeled. > Edgar: Are you testing it? Yeah. Since Linux added the power and clock nodes to the dts, direct QEMU Linux boots don't work since you need the firmware modules. Firmware only runs on the Xilinx QEMU (not upstream). I've patched the Linux tree dts files to remove these nodes for our testing. It would be good to have a zcu102 QEMU dts somewhere. Here's the patched tree with some information in the README.xilinx file. git log -p will show the needed changes in DTS. https://github.com/edgarigl/linux/blob/xilinx-pcie-no-fw/README.xilinx I've also attached the modified dtb file to this email for convenience. Cheers, Edgar
Attachment:
zynqmp-zcu102-rev1.0.dtb
Description: Binary data
