Signed-off-by: Chen Lu <B46807@xxxxxxxxxxxxx>
Signed-off-by: Chao Fu <B44548@xxxxxxxxxxxxx>
Signed-off-by: Jingchang Lu <jingchang.lu@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/ls1021a-twr.dts | 236 ++++++++++++++++++++++++++++++++++++++
2 files changed, 238 insertions(+), 1 deletion(-)
create mode 100755 arch/arm/boot/dts/ls1021a-twr.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0569312..4482cc5 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -236,7 +236,8 @@ dtb-$(CONFIG_ARCH_MXC) += \
vf610-colibri.dtb \
vf610-cosmic.dtb \
vf610-twr.dtb \
- ls1021a-qds.dtb
+ ls1021a-qds.dtb \
+ ls1021a-twr.dtb
dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx23-olinuxino.dtb \
imx23-stmp378x_devb.dtb \
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
new file mode 100755
index 0000000..16e4d7a
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -0,0 +1,236 @@
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+ model = "LS1021A TWR Board";
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+
+ sound {
+ compatible = "fsl,vf610-sgtl5000";
+ simple-audio-card,name = "FSL-VF610-TWR-BOARD";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "Microphone Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "Speaker Ext", "LINE_OUT";
+
+ simple-audio-card,cpu = <&sai2>;
+
+ simple-audio-card,codec = <&codec>;
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&dspi1 {
+ bus-num = <0>;
+ status = "okay";
+
+ dspiflash: s25fl064k@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl064k";
+ spi-max-frequency = <16000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
+ };
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+&enet0 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "sgmii";
+ status = "ok";
+};
+
+&enet1 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "sgmii";
+ status = "ok";
+};
+
+&enet2 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ status = "ok";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ codec: sgtl5000@14 {
+ compatible = "fsl,sgtl5000";
+ reg = <0x14>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ clocks = <&platform_clk 1>;
+ };
+};
+
+&ifc {
+ status = "okay";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ /* NOR, and CPLD on board */
+ ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+ 0x2 0x0 0x0 0x7fb00000 0x00000100>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* 128KB for rcw */
+ reg = <0x00000000 0x0020000>;
+ label = "NOR bank0 RCW Image";
+ };
+
+ partition@20000 {
+ /* 1MB for DTB */
+ reg = <0x00020000 0x00100000>;
+ label = "NOR DTB Image";
+ };
+
+ partition@120000 {
+ /* 8 MB for Linux Kernel Image */
+ reg = <0x00120000 0x00800000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition@920000 {
+ /* 56MB for Ramdisk Root File System */
+ reg = <0x00920000 0x03600000>;
+ label = "NOR Ramdisk Root File System Image";
+ };
+
+ partition@3f80000 {
+ /* 512KB for bank4 u-boot Image */
+ reg = <0x03f80000 0x80000>;
+ label = "NOR bank4 u-boot Image";
+ };
+
+ partition@4000000 {
+ /* 128KB for bank4 RCW Image */
+ reg = <0x04000000 0x20000>;
+ label = "NOR bank4 RCW Image";
+ };
+
+ partition@4020000 {
+ /* 63MB JFFS2 ROOT File System Image */
+ reg = <0x04020000 0x3f00000>;
+ label = "NOR JFFS2 ROOT File System Image";
+ };
+
+ partition@7f80000 {
+ /* 512KB for bank0 u-boot Image */
+ reg = <0x07f80000 0x80000>;
+ label = "NOR bank0 u-boot Image";
+ };
+
+ };
+
+ fpga: board-control@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ls1021aqds-fpga", "fsl,fpga-qixis";
+ reg = <0x2 0x0 0x00000100>;
+ bank-width = <1>;
+ device-width = <1>;
+ ranges = <0 2 0 0x100>;
+ };
+
+};
+
+&lpuart0 {
+ status = "okay";
+};
+
+&mdio0 {
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ tbi1: tbi-phy@1f {
+ reg = <0x1f>;
+ device_type = "tbi-phy";
+ };
+};
+
+&pwm6 {
+ status = "okay";
+};
+
+&pwm7 {
+ status = "okay";
+};
+
+&qspi {
+ num-cs = <2>;
+ status = "okay";
+
+ qflash0: s25fl128s@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl128s";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+
+ partition@0 {
+ label = "s25fl128s-0";
+ reg = <0x0 0x1000000>;
+ };
+ };
+};
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
