Hello Tushar,
Thanks a lot for your feedback.
On 07/02/2014 11:20 AM, Tushar Behera wrote:
> On 06/26/2014 11:45 PM, Javier Martinez Canillas wrote:
>> Peach pit and pi boards uses a Maxim 77802 power management
>> IC to drive regulators and its Real Time Clock. This patch
>> adds support for this chip.
>>
>> These are the device nodes and pinctrl configuration that
>> are present on the Peach pit DeviceTree source file in the
>> the Chrome OS kernel 3.8 tree.
>>
>> Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
>> Tested-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
>> ---
>
> [ ... ]
>
>> +
>> + regulators {
>> + buck1_reg: BUCK1 {
>> + regulator-name = "vdd_mif";
>> + regulator-min-microvolt = <800000>;
>> + regulator-max-microvolt = <1300000>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-ramp-delay = <12500>;
>> + };
>
> IMO, adding a blank line between sub-nodes would be better.
>
Ok
>> + buck2_reg: BUCK2 {
>> + regulator-name = "vdd_arm_real";
>> + regulator-min-microvolt = <800000>;
>> + regulator-max-microvolt = <1500000>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-ramp-delay = <12500>;
>> + };
>
> [ ... ]
>
>> + vqmmc_sdcard: ldo4_reg: LDO4 {
>> + regulator-name = "vdd_sd";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <2800000>;
>> + regulator-always-on;
>> +
>
> Blank line, can be removed.
>
Ok
>> + };
>
> [ ... ]
>> + ldo23_reg: LDO23 {
>> + regulator-name = "ld0_23";
>
> ldo_23, 'o' in place of '0'.
>
Right, missed that. Thanks for pointing out.
> Similar comments for peach-pi DTS file.
>
Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
