The LAB and IBB regulator have just one range and it is useless
to use linear_range ops, as these are used to express multiple
linear ranges.
Switch list_voltage and map_voltage callbacks to *_linear instead.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
---
drivers/regulator/qcom-labibb-regulator.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/drivers/regulator/qcom-labibb-regulator.c b/drivers/regulator/qcom-labibb-regulator.c
index 9f51c96f16fb..0fe0f6bce4cf 100644
--- a/drivers/regulator/qcom-labibb-regulator.c
+++ b/drivers/regulator/qcom-labibb-regulator.c
@@ -59,8 +59,8 @@ static const struct regulator_ops qcom_labibb_ops = {
.is_enabled = regulator_is_enabled_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .list_voltage = regulator_list_voltage_linear_range,
- .map_voltage = regulator_map_voltage_linear_range,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
};
static const struct regulator_desc pmi8998_lab_desc = {
@@ -76,10 +76,8 @@ static const struct regulator_desc pmi8998_lab_desc = {
.off_on_delay = LABIBB_OFF_ON_DELAY,
.owner = THIS_MODULE,
.type = REGULATOR_VOLTAGE,
- .linear_ranges = (struct linear_range[]) {
- REGULATOR_LINEAR_RANGE(4600000, 0, 15, 100000),
- },
- .n_linear_ranges = 1,
+ .min_uV = 4600000,
+ .uV_step = 100000,
.n_voltages = 16,
.ops = &qcom_labibb_ops,
};
@@ -97,10 +95,8 @@ static const struct regulator_desc pmi8998_ibb_desc = {
.off_on_delay = LABIBB_OFF_ON_DELAY,
.owner = THIS_MODULE,
.type = REGULATOR_VOLTAGE,
- .linear_ranges = (struct linear_range[]) {
- REGULATOR_LINEAR_RANGE(1400000, 0, 63, 100000),
- },
- .n_linear_ranges = 1,
+ .min_uV = 1400000,
+ .uV_step = 100000,
.n_voltages = 64,
.ops = &qcom_labibb_ops,
};
--
2.30.0
