On Sat, 16 Jan 2021 20:25:36 -0800, Alistair Francis wrote: > Initial support for the Silergy SY7636A-regulator Power Management chip > driver. > > Signed-off-by: Alistair Francis <alistair@xxxxxxxxxxxxx> > --- > .../bindings/regulator/silergy,sy7636a.yaml | 39 +++++++++++++++++++ > 1 file changed, 39 insertions(+) > create mode 100644 Documentation/devicetree/bindings/regulator/silergy,sy7636a.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/regulator/silergy,sy7636a.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/regulator/silergy,sy7636a.yaml# Documentation/devicetree/bindings/regulator/silergy,sy7636a.example.dts:22.26-28.15: Warning (unit_address_vs_reg): /example-0/i2c/regulator@60: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/regulator/silergy,sy7636a.example.dts:22.26-28.15: Warning (i2c_bus_reg): /example-0/i2c/regulator@60: missing or empty reg property See https://patchwork.ozlabs.org/patch/1427907 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
