[PATCH 12/14] cpufreq: cpu0: Extend support beyond CPU0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Most of the infrastructure is in place now, with only little left. How to find
siblings ?

Stephen Boyd suggested to compare "clocks" properties from CPU's DT node and
siblings should match. This patch adds another routine find_siblings() which
calls of_clk_shared_by_cpus() to find if CPUs share clock line or not.

If of_clk_shared_by_cpus() returns error, we fallback to all CPUs sharing clock
line assumption as existing platforms don't have "clocks" property in all CPU
nodes and would fail from of_clk_shared_by_cpus().

Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
 .../devicetree/bindings/cpufreq/cpufreq-cpu0.txt   | 72 ++++++++++++++++++++--
 drivers/cpufreq/cpufreq-cpu0.c                     | 35 ++++++++++-
 2 files changed, 101 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
index f055515..4b83c1a 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
@@ -1,11 +1,11 @@
-Generic CPU0 cpufreq driver
+Generic cpufreq driver
 
-It is a generic cpufreq driver for CPU0 frequency management.  It
+It is a generic cpufreq driver for frequency management.  It
 supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
-systems which share clock and voltage across all CPUs.
+systems which may or maynot share clock and voltage across all CPUs.
 
 Both required and optional properties listed below must be defined
-under node /cpus/cpu@0.
+under node /cpus/cpu@x. Where x is the first cpu inside a cluster.
 
 Required properties:
 - operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
@@ -19,9 +19,16 @@ Optional properties:
 - cooling-min-level:
 - cooling-max-level:
      Please refer to Documentation/devicetree/bindings/thermal/thermal.txt.
+- clocks: If CPU clock is populated from DT, "clocks" property must be copied to
+  every cpu node sharing clock with cpu@x. Generic cpufreq driver compares
+  "clocks" to find siblings, i.e. to see which CPUs share clock/voltages. If
+  only cpu@0 contains "clocks" property it is assumed that all CPUs share clock
+  line.
 
 Examples:
 
+1. All CPUs share clock/voltages
+
 cpus {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -36,6 +43,8 @@ cpus {
 			396000  950000
 			198000  850000
 		>;
+		clocks = <&clock CLK_ARM_CLK>;
+		clock-names = "cpu";
 		clock-latency = <61036>; /* two CLK32 periods */
 		#cooling-cells = <2>;
 		cooling-min-level = <0>;
@@ -46,17 +55,72 @@ cpus {
 		compatible = "arm,cortex-a9";
 		reg = <1>;
 		next-level-cache = <&L2>;
+		clocks = <&clock CLK_ARM_CLK>;
 	};
 
 	cpu@2 {
 		compatible = "arm,cortex-a9";
 		reg = <2>;
 		next-level-cache = <&L2>;
+		clocks = <&clock CLK_ARM_CLK>;
 	};
 
 	cpu@3 {
 		compatible = "arm,cortex-a9";
 		reg = <3>;
 		next-level-cache = <&L2>;
+		clocks = <&clock CLK_ARM_CLK>;
+	};
+};
+
+
+2. All CPUs inside a cluster share clock/voltages, there are multiple clusters.
+
+cpus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpu@0 {
+		compatible = "arm,cortex-a15";
+		reg = <0>;
+		next-level-cache = <&L2>;
+		operating-points = <
+			/* kHz    uV */
+			792000  1100000
+			396000  950000
+			198000  850000
+		>;
+		clocks = <&clock CLK_ARM1_CLK>;
+		clock-names = "cpu";
+		clock-latency = <61036>; /* two CLK32 periods */
+	};
+
+	cpu@1 {
+		compatible = "arm,cortex-a15";
+		reg = <1>;
+		next-level-cache = <&L2>;
+		clocks = <&clock CLK_ARM1_CLK>;
+	};
+
+	cpu@100 {
+		compatible = "arm,cortex-a7";
+		reg = <100>;
+		next-level-cache = <&L2>;
+		operating-points = <
+			/* kHz    uV */
+			792000  950000
+			396000  750000
+			198000  450000
+		>;
+		clocks = <&clock CLK_ARM2_CLK>;
+		clock-names = "cpu";
+		clock-latency = <61036>; /* two CLK32 periods */
+	};
+
+	cpu@101 {
+		compatible = "arm,cortex-a7";
+		reg = <101>;
+		next-level-cache = <&L2>;
+		clocks = <&clock CLK_ARM2_CLK>;
 	};
 };
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index 44633f6..b3f2bf0 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -177,6 +177,30 @@ try_again:
 	return ret;
 }
 
+/*
+ * Sets all CPUs as sibling if any cpu doesn't have a "clocks" property,
+ * Otherwise it matches "clocks" property to find siblings.
+ */
+static void find_siblings(struct cpufreq_policy *policy)
+{
+	int cpu, ret;
+
+	for_each_possible_cpu(cpu) {
+		if (cpu == policy->cpu)
+			continue;
+
+		ret = of_clk_shared_by_cpus(policy->cpu, cpu);
+
+		/* Error while parsing nodes, fallback to set-all */
+		if (ret < 0) {
+			cpumask_setall(policy->cpus);
+			return;
+		} else if (ret == 1) {
+			cpumask_set_cpu(cpu, policy->cpus);
+		}
+	}
+}
+
 static int cpu0_cpufreq_init(struct cpufreq_policy *policy)
 {
 	struct cpufreq_frequency_table *freq_table;
@@ -266,9 +290,16 @@ static int cpu0_cpufreq_init(struct cpufreq_policy *policy)
 	policy->driver_data = priv;
 
 	policy->clk = cpu_clk;
-	ret = cpufreq_generic_init(policy, freq_table, transition_latency);
-	if (ret)
+
+	find_siblings(policy);
+	ret = cpufreq_table_validate_and_show(policy, freq_table);
+	if (ret) {
+		dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__,
+			ret);
 		goto out_cooling_unregister;
+	}
+
+	policy->cpuinfo.transition_latency = transition_latency;
 
 	return 0;
 
-- 
2.0.0.rc2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux