On Tue, Jul 01, 2014 at 08:05:52AM +0200, Johannes Pointner wrote:
> This patch adds support for the ntc thermistor B57330V2103 from EPCOS.
>
> Change since v1:
> 1. Rearranged compatible node values alphabetically
> 2. Fixed wrapped line
>
> Signed-off-by: Johannes Pointner <johannes.pointner@xxxxxxxxx>
Copying the devicetree mailing list.
Looks ok to me, though I'll wait a bit to see if there is feedback
on this or the addition of epcos to the list of manufacturers from
the devicetree group. Unless there is negative feedback, I'll queue
it up for 3.17.
Thanks,
Guenter
> ---
> .../devicetree/bindings/hwmon/ntc_thermistor.txt | 1 +
> Documentation/hwmon/ntc_thermistor | 5 +++
> drivers/hwmon/Kconfig | 2 +-
> drivers/hwmon/ntc_thermistor.c | 50 +++++++++++++++++++++-
> include/linux/platform_data/ntc_thermistor.h | 1 +
> 5 files changed, 57 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
> index b117b2e..2391e5c 100644
> --- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
> +++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
> @@ -3,6 +3,7 @@ NTC Thermistor hwmon sensors
>
> Requires node properties:
> - "compatible" value : one of
> + "epcos,b57330v2103"
> "murata,ncp15wb473"
> "murata,ncp18wb473"
> "murata,ncp21wb473"
> diff --git a/Documentation/hwmon/ntc_thermistor b/Documentation/hwmon/ntc_thermistor
> index 057b770..c5e05e2 100644
> --- a/Documentation/hwmon/ntc_thermistor
> +++ b/Documentation/hwmon/ntc_thermistor
> @@ -6,6 +6,11 @@ Supported thermistors from Murata:
> Prefixes: 'ncp15wb473', 'ncp18wb473', 'ncp21wb473', 'ncp03wb473', 'ncp15wl333'
> Datasheet: Publicly available at Murata
>
> +Supported thermistors from EPCOS:
> +* EPCOS NTC Thermistors B57330V2103
> + Prefixes: b57330v2103
> + Datasheet: Publicly available at EPCOS
> +
> Other NTC thermistors can be supported simply by adding compensation
> tables; e.g., NCP15WL333 support is added by the table ncpXXwl333.
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 02d3d85..b34d673 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1061,7 +1061,7 @@ config SENSORS_NTC_THERMISTOR
>
> Currently, this driver supports
> NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333
> - from Murata.
> + from Murata and B57330V2103 from EPCOS.
>
> This driver can also be built as a module. If so, the module
> will be called ntc-thermistor.
> diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
> index bdfbe91..25c8deb 100644
> --- a/drivers/hwmon/ntc_thermistor.c
> +++ b/drivers/hwmon/ntc_thermistor.c
> @@ -51,6 +51,7 @@ static const struct platform_device_id ntc_thermistor_id[] = {
> { "ncp21wb473", TYPE_NCPXXWB473 },
> { "ncp03wb473", TYPE_NCPXXWB473 },
> { "ncp15wl333", TYPE_NCPXXWL333 },
> + { "b57330v2103", TYPE_B57330V2103},
> { },
> };
>
> @@ -133,6 +134,47 @@ static const struct ntc_compensation ncpXXwl333[] = {
> { .temp_c = 125, .ohm = 707 },
> };
>
> +/*
> + * The following compensation table is from the specification of EPCOS NTC
> + * Thermistors Datasheet
> + */
> +static const struct ntc_compensation b57330v2103[] = {
> + { .temp_c = -40, .ohm = 190030 },
> + { .temp_c = -35, .ohm = 145360 },
> + { .temp_c = -30, .ohm = 112060 },
> + { .temp_c = -25, .ohm = 87041 },
> + { .temp_c = -20, .ohm = 68104 },
> + { .temp_c = -15, .ohm = 53665 },
> + { .temp_c = -10, .ohm = 42576 },
> + { .temp_c = -5, .ohm = 34001 },
> + { .temp_c = 0, .ohm = 27326 },
> + { .temp_c = 5, .ohm = 22096 },
> + { .temp_c = 10, .ohm = 17973 },
> + { .temp_c = 15, .ohm = 14703 },
> + { .temp_c = 20, .ohm = 12090 },
> + { .temp_c = 25, .ohm = 10000 },
> + { .temp_c = 30, .ohm = 8311 },
> + { .temp_c = 35, .ohm = 6941 },
> + { .temp_c = 40, .ohm = 5825 },
> + { .temp_c = 45, .ohm = 4911 },
> + { .temp_c = 50, .ohm = 4158 },
> + { .temp_c = 55, .ohm = 3536 },
> + { .temp_c = 60, .ohm = 3019 },
> + { .temp_c = 65, .ohm = 2588 },
> + { .temp_c = 70, .ohm = 2227 },
> + { .temp_c = 75, .ohm = 1924 },
> + { .temp_c = 80, .ohm = 1668 },
> + { .temp_c = 85, .ohm = 1451 },
> + { .temp_c = 90, .ohm = 1266 },
> + { .temp_c = 95, .ohm = 1108 },
> + { .temp_c = 100, .ohm = 973 },
> + { .temp_c = 105, .ohm = 857 },
> + { .temp_c = 110, .ohm = 757 },
> + { .temp_c = 115, .ohm = 671 },
> + { .temp_c = 120, .ohm = 596 },
> + { .temp_c = 125, .ohm = 531 },
> +};
> +
> struct ntc_data {
> struct device *hwmon_dev;
> struct ntc_thermistor_platform_data *pdata;
> @@ -173,6 +215,8 @@ static const struct of_device_id ntc_match[] = {
> .data = &ntc_thermistor_id[3] },
> { .compatible = "murata,ncp15wl333",
> .data = &ntc_thermistor_id[4] },
> + { .compatible = "epcos,b57330v2103",
> + .data = &ntc_thermistor_id[5]},
>
> /* Usage of vendor name "ntc" is deprecated */
> { .compatible = "ntc,ncp15wb473",
> @@ -490,6 +534,10 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
> data->comp = ncpXXwl333;
> data->n_comp = ARRAY_SIZE(ncpXXwl333);
> break;
> + case TYPE_B57330V2103:
> + data->comp = b57330v2103;
> + data->n_comp = ARRAY_SIZE(b57330v2103);
> + break;
> default:
> dev_err(&pdev->dev, "Unknown device type: %lu(%s)\n",
> pdev_id->driver_data, pdev_id->name);
> @@ -546,7 +594,7 @@ static struct platform_driver ntc_thermistor_driver = {
>
> module_platform_driver(ntc_thermistor_driver);
>
> -MODULE_DESCRIPTION("NTC Thermistor Driver from Murata");
> +MODULE_DESCRIPTION("NTC Thermistor Driver");
> MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>");
> MODULE_LICENSE("GPL");
> MODULE_ALIAS("platform:ntc-thermistor");
> diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h
> index c7285b5..0a6de4c 100644
> --- a/include/linux/platform_data/ntc_thermistor.h
> +++ b/include/linux/platform_data/ntc_thermistor.h
> @@ -26,6 +26,7 @@ struct iio_channel;
> enum ntc_thermistor_type {
> TYPE_NCPXXWB473,
> TYPE_NCPXXWL333,
> + TYPE_B57330V2103,
> };
>
> struct ntc_thermistor_platform_data {
> --
> 2.0.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
