On Wed, 6 Jan 2021 16:08:30 +0000
André Przywara <andre.przywara@xxxxxxx> wrote:
> On 06/01/2021 15:53, Chen-Yu Tsai wrote:
>
> Hi,
>
> > On Wed, Jan 6, 2021 at 11:05 PM Andre Przywara <andre.przywara@xxxxxxx> wrote:
> >>
> >> The Pine64-LTS board features a blue status LED on pin PL7.
> >
> > I'd like some clarification about this.
> >
> > My Pine64-LTS was a used unit personally given to me by TL Lim, which came
> > with LEDs that I assume were soldered on by hand as their mounting angles
> > are slightly off. My Pine64+ (the original from the Kickstarter campaign)
> > and SoPine baseboard (a new unit, also given to me by TL Lim) came without
> > LEDs soldered on.
>
> The situation is similar here ;-), and that's why I checked the pictures
> in the store. The LEDs look slightly different (not angled), but the
> location of the pads is the same and I see two LEDs on the picture. The
> schematic seems to confirm both the pins, the polarity and the colour.
> Hence I am highly confident that it's a blue LED on PL7, active low.
>
> But we can wait for other people to confirm.
>
> Thanks!
> Andre
I have three boards :
- Pine64, no led (bought after the kickstarter)
- A64-LTS, blue color, and active low, no weird mounting angles here
(don't remember if I bought this one or not)
- Sopine Baseboard, no led (definitly bought this myself)
> > I'm OK with adding the LED to the device tree. I'm just not sure about the
> > color.
> >
> >
> > ChenYu
> >
> >> Describe it in the DT.
> >>
> >> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
> >> ---
> >> .../boot/dts/allwinner/sun50i-a64-pine64-lts.dts | 11 +++++++++++
> >> 1 file changed, 11 insertions(+)
> >>
> >> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
> >> index 302e24be0a31..55bf4a0fc31c 100644
> >> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
> >> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
> >> @@ -1,10 +1,21 @@
> >> // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> >> // Copyright (c) 2018 ARM Ltd.
> >>
> >> +#include <dt-bindings/leds/common.h>
> >> #include "sun50i-a64-sopine-baseboard.dts"
> >>
> >> / {
> >> model = "Pine64 LTS";
> >> compatible = "pine64,pine64-lts", "allwinner,sun50i-r18",
> >> "allwinner,sun50i-a64";
> >> +
> >> + leds {
> >> + compatible = "gpio-leds";
> >> +
> >> + status {
> >> + function = LED_FUNCTION_STATUS;
> >> + color = <LED_COLOR_ID_BLUE>;
> >> + gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
> >> + };
> >> + };
> >> };
> >> --
> >> 2.17.5
> >>
> >> --
> >> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> >> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx.
> >> To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20210106150525.15403-3-andre.przywara%40arm.com.
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Emmanuel Vadot <manu@xxxxxxxxxxxxxxxx> <manu@xxxxxxxxxxx>
