Hi,
On Wed, Jan 6, 2021 at 11:05 PM Andre Przywara <andre.przywara@xxxxxxx> wrote:
>
> The Pine64-LTS board features a blue status LED on pin PL7.
I'd like some clarification about this.
My Pine64-LTS was a used unit personally given to me by TL Lim, which came
with LEDs that I assume were soldered on by hand as their mounting angles
are slightly off. My Pine64+ (the original from the Kickstarter campaign)
and SoPine baseboard (a new unit, also given to me by TL Lim) came without
LEDs soldered on.
I'm OK with adding the LED to the device tree. I'm just not sure about the
color.
ChenYu
> Describe it in the DT.
>
> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
> ---
> .../boot/dts/allwinner/sun50i-a64-pine64-lts.dts | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
> index 302e24be0a31..55bf4a0fc31c 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
> @@ -1,10 +1,21 @@
> // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> // Copyright (c) 2018 ARM Ltd.
>
> +#include <dt-bindings/leds/common.h>
> #include "sun50i-a64-sopine-baseboard.dts"
>
> / {
> model = "Pine64 LTS";
> compatible = "pine64,pine64-lts", "allwinner,sun50i-r18",
> "allwinner,sun50i-a64";
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + status {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_BLUE>;
> + gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
> + };
> + };
> };
> --
> 2.17.5
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx.
> To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20210106150525.15403-3-andre.przywara%40arm.com.
