[PATCH] arm64: dts: imx8mn-beacon-som: Configure RTC aliases

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On the i.MX8MN Beacon SOM, there is an RTC chip which is fed power
from the baseboard during power off.  The SNVS RTC integrated into
the SoC is not fed power.  Depending on the order the modules are
loaded, this can be a problem if the external RTC isn't rtc0.

Make the alias for rtc0 point to the external RTC all the time and
rtc1 point to the SVNS in order to correctly hold date/time over
a power-cycle.

Signed-off-by: Adam Ford <aford173@xxxxxxxxx>

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
index 67e5e5b9ddea..2120e6485393 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -4,6 +4,11 @@
  */
 
 / {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
 	usdhc1_pwrseq: usdhc1_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -212,7 +217,7 @@ eeprom@50 {
 		reg = <0x50>;
 	};
 
-	rtc@51 {
+	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
 	};
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux