On Mon, Jan 04, 2021 at 07:39:44AM +0200, Laurent Pinchart wrote: > From: Benoit Parrot <bparrot@xxxxxx> > > Add device tree bindings for the OmniVision OV10633 and OV10635 camera > sensors. > > Signed-off-by: Benoit Parrot <bparrot@xxxxxx> > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > --- > .../bindings/media/i2c/ov1063x.yaml | 97 +++++++++++++++++++ ovti,ov1063x.yaml > MAINTAINERS | 7 ++ > 2 files changed, 104 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/ov1063x.yaml > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov1063x.yaml b/Documentation/devicetree/bindings/media/i2c/ov1063x.yaml > new file mode 100644 > index 000000000000..b5e08dd2f496 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/ov1063x.yaml > @@ -0,0 +1,97 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/ov1063x.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: OmniVision OV10633/OV1035 Camera Sensor > + > +maintainers: > + - Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > + > +description: |- > + The OmniVision OV1063x is a 720p camera sensor which supports resolutions up > + to 1280x800 and 8- and 10-bit YUV output formats. > + > +properties: > + compatible: > + enum: > + - ovti,ov10633 > + - ovti,ov10635 > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + clocks-names: > + const: xvclk > + > + reset-gpios: > + maxItems: 1 > + description: > + Specifier for the GPIO connected to the RESETB pin. > + > + powerdown-gpios: > + maxItems: 1 > + description: > + Specifier for the GPIO connected to the PWDN pin. > + > + port: > + $ref: /schemas/graph.yaml#/properties/port > + additionalProperties: false > + > + properties: > + endpoint: > + $ref: ../video-interfaces.yaml# TBC, this patch has to go in after the above file. Otherwise, Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > + unevaluatedProperties: false > + > + properties: > + hsync-active: true > + vsync-active: true > + pclk-sample: true > + bus-width: > + enum: [ 8, 10 ] > + > +required: > + - compatible > + - reg > + - clocks > + - clocks-names > + - port > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + i2c { > + clock-frequency = <400000>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + camera@37 { > + compatible = "ovti,ov10633"; > + reg = <0x37>; > + > + clocks = <&fixed_clock>; > + clocks-names = "xvclk"; > + > + reset-gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; > + powerdown-gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; > + > + port { > + camera1: endpoint { > + remote-endpoint = <&vin1a_ep>; > + hsync-active = <1>; > + vsync-active = <1>; > + pclk-sample = <0>; > + bus-width = <8>; > + }; > + }; > + }; > + }; > + > +... > diff --git a/MAINTAINERS b/MAINTAINERS > index 281de213ef47..9dc3a7d75460 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -12867,6 +12867,13 @@ M: Harald Welte <laforge@xxxxxxxxxxxx> > S: Maintained > F: drivers/char/pcmcia/cm4040_cs.* > > +OMNIVISION OV10633 SENSOR DRIVER > +M: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > +L: linux-media@xxxxxxxxxxxxxxx > +S: Maintained > +T: git git://linuxtv.org/media_tree.git > +F: Documentation/devicetree/bindings/media/i2c/ov1063x.yaml > + > OMNIVISION OV13858 SENSOR DRIVER > M: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> > L: linux-media@xxxxxxxxxxxxxxx > -- > Regards, > > Laurent Pinchart >
