Colleagues,
On Fri, 4 Dec 2020 at 05:55, Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:
>
> This patch serie adds support for thermal monitoring block on Qualcomm's
> PMIC5 chips. PM8150{,b,l} and sm8250-mtp board device trees are extended
> to support thermal zones provided by this thermal monitoring block.
> Unlike the rest of PMIC thermal senses, these thermal zones describe
> particular thermistors, which differ between from board to board.
>
> Changes since v9:
> - In patch 12 add comments to the code as requested by Daniel Lezcano.
> - Change copyright comment in qcom-spmi-adc-tm5.c to clearly note
> driver history.
Gracious ping for this patch series. Daniel, do you have any comments?
>
> Changes since v8:
> - Simplified qcom_vadc_map_voltage_temp() code by removing ascending
> tables support
> - Simplified qcom-vadc-common volt/temp mapping code
> - Implement suggestions by Matthias Kaehlcke: message formatting,
> rewrite comments, remove unused variable initialization.
>
> Changes since v7:
> - Move qcom-vadc-common.h header to include/linux/iio/adc/ dir.
> - Use explicit sizeof(var) instead of hand-coding 1 when accessing
> adc-tm registers.
> - Remove buffer read from adc_tm5_init().
> - Remove extra on-stack var from adc_tm5_get_temp().
> - Minor formatting changes as suggested Daniel.
>
> Changes since v6:
> - Added include <linux/bitfield.h> as noted by Jishnu Prakash.
>
> Changes since v5:
> - Reworked DT bindings:
> * Removed qcom,adc-channel, instead it is parsed from io-channels
> * Renamed qcom,hw-settle-time to include -us suffix
> - Re-added monitor enabling which got lost during refactored. Noted by
> Jishnu Prakash.
> - Use threaded IRQ handler as susggested by Jishnu.
>
> Changes since v4:
> - Added kernel-doc comments to ADC-TM structures
> - Used several sizeof(buf) instead of hand-conding register size
>
> Changes since v3:
> - Fix DT description to spell "thermal monitoring" instead of just TM
> - Fix warnings in DT example
> - Add EXPORT_SYMBOL_GPL(of_iio_channel_get_by_name)
> - Fixed whitespace chanes in qcom-vadc-common.c
> - Removed error message if IIO chanel get returns -EPROBE_DEFER
>
> Changes since v2:
> - IIO: export of_iio_channel_get_by_name() function
> - dt-bindings: move individual io-channels to each thermal monitoring
> channel rather than listing them all in device node
> - added fallback defaults to of_device_get_match_data calls in
> qcom-spmi-adc5 and qcom-spmi-adc-tm5 drivers
> - minor typo fixes
>
> Changes since v1:
> - Introduce fixp_linear_interpolate() by Craig Tatlor
> - Lots of syntax/whitespace changes
> - Cleaned up register definitions per Jonathan's suggestion
> - Implemented most of the suggestions from Bjorn's and Jonathan's
> review
>
>
--
With best wishes
Dmitry
