Re: [PATCH 2/3] ARM: dts: motorola-mapphone: Configure lower temperature passive cooling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi!

> The current cooling device temperature is too high at 100C as we have a
> battery on the device right next to the SoC as pointed out by Carl Philipp
> Klemm <philipp@xxxxxxxx>. Let's configure the max temperature to
> 80C.

It is very possible I don't have power management set up correctly, as
it breaks the modem.

(Additional problem is that shutdown does not work for me, it reboots
instead, so emergency poweroff won't do much good).

Shortly after bootup with kernel 5.9, I was using for motmdm debugging.

19:03, uptime 4min, CPU temp rose from 41 to 43C. Battery and board
are at 28C, 30C. Let me plug in the charger. It draws 350mA from USB.

19:20, CPU still at 43C, board and battery at 30C. That's way better
than I remember.

I ran "cat /dev/zero"; within seconds, CPU is at 52C. It also went
down to 45C rather quickly.

Lets try three instances of cat /dev/zero. Again, 52C in 20 seconds
and it slowly climbs to 58.5C.

Let's try ofono build. 60C rather quickly, then 62C and 65C. It takes
few minutes to climb to 68.5C.

But... this is way better then I remember. Let's hope temperatures
don't climb back during some other use. (Also... machine seems cooler
to touch.)

Best regards,
								Pavel

-- 
http://www.livejournal.com/~pavelmachek

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux