[PATCH 2/3] ARM: dts: motorola-mapphone: Configure lower temperature passive cooling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The current cooling device temperature is too high at 100C as we have a
battery on the device right next to the SoC as pointed out by Carl Philipp
Klemm <philipp@xxxxxxxx>. Let's configure the max temperature to 80C.

As we only have a tshut interrupt and no talert interrupt on 4430, we have
a passive cooling device configured for 4430. However, we want the poll
interval to be 10 seconds instead of 1 second for power management. The
value of 10 seconds seems like plenty of time to notice the temperature
increase above the 75C temperatures. Having the bandgap temperature change
seems to take several tens of seconds because of heat dissipation above
75C range as monitored with a full CPU load.

Cc: Carl Philipp Klemm <philipp@xxxxxxxx>
Cc: Merlijn Wajer <merlijn@xxxxxxxxxx>
Cc: Pavel Machek <pavel@xxxxxx>
Cc: Sebastian Reichel <sre@xxxxxxxxxx>
Suggested-by: Carl Philipp Klemm <philipp@xxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
 arch/arm/boot/dts/motorola-mapphone-common.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -192,6 +192,14 @@ backlight: backlight {
 	};
 };
 
+&cpu_thermal {
+	polling-delay = <10000>; /* milliseconds */
+};
+
+&cpu_alert0 {
+        temperature = <80000>; /* millicelsius */
+};
+
 &dss {
 	status = "okay";
 };
-- 
2.29.2



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux