From: Kévin L'hôpital <kevin.lhopital@xxxxxxxxxxx> The Bananapi M3 supports a camera module which includes an OV8865 sensor connected via the parallel CSI interface and an OV8865 sensor connected via MIPI CSI-2. The I2C2 bus is shared by the two sensors as well as the (active-low) reset signal, but each sensor has it own shutdown line. Signed-off-by: Kévin L'hôpital <kevin.lhopital@xxxxxxxxxxx> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx> --- arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 102 +++++++++++++++++++ 1 file changed, 102 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 431f70234d36..bebe843a069b 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -85,6 +85,30 @@ green { }; }; + reg_ov8865_avdd: ov8865-avdd { + compatible = "regulator-fixed"; + regulator-name = "ov8865-avdd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <®_dldo4>; + }; + + reg_ov8865_dovdd: ov8865-dovdd { + compatible = "regulator-fixed"; + regulator-name = "ov8865-dovdd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <®_dldo4>; + }; + + reg_ov8865_dvdd: ov8865-dvdd { + compatible = "regulator-fixed"; + regulator-name = "ov8865-dvdd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <®_eldo1>; + }; + reg_usb1_vbus: reg-usb1-vbus { compatible = "regulator-fixed"; regulator-name = "usb1-vbus"; @@ -115,6 +139,23 @@ &cpu100 { cpu-supply = <®_dcdc3>; }; +&csi { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + csi_in_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_out_csi>; + }; + }; + }; +}; + &de { status = "okay"; }; @@ -147,6 +188,36 @@ hdmi_out_con: endpoint { }; }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pe_pins>; + status = "okay"; + + ov8865: camera@36 { + compatible = "ovti,ov8865"; + reg = <0x36>; + pinctrl-names = "default"; + pinctrl-0 = <&csi_mclk_pin>; + clocks = <&ccu CLK_CSI_MCLK>; + assigned-clocks = <&ccu CLK_CSI_MCLK>; + assigned-clock-rates = <24000000>; + avdd-supply = <®_ov8865_avdd>; + dovdd-supply = <®_ov8865_dovdd>; + dvdd-supply = <®_ov8865_dvdd>; + powerdown-gpios = <&pio 4 17 GPIO_ACTIVE_LOW>; /* PE17 */ + reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */ + + port { + ov8865_out_mipi_csi2: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <360000000>; + + remote-endpoint = <&mipi_csi2_in_ov8865>; + }; + }; + }; +}; + &mdio { rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -154,6 +225,24 @@ rgmii_phy: ethernet-phy@1 { }; }; +&mipi_csi2 { + status = "okay"; +}; + +&mipi_csi2_in { + mipi_csi2_in_ov8865: endpoint { + data-lanes = <1 2 3 4>; + + remote-endpoint = <&ov8865_out_mipi_csi2>; + }; +}; + +&mipi_csi2_out { + mipi_csi2_out_csi: endpoint { + remote-endpoint = <&csi_in_mipi_csi2>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -327,11 +416,24 @@ ®_dldo3 { regulator-name = "vcc-pd"; }; +®_dldo4 { + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + ®_drivevbus { regulator-name = "usb0-vbus"; status = "okay"; }; +®_eldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "dvdd-csi-r"; +}; + ®_fldo1 { regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1320000>; -- 2.29.2