This series adds support for the OV8865 image sensor, as a V4L2 subdev driver. Although an initial series was submitted by Kévin L'hôpital some weeks ago, this version is significantly new and should be considered a new series. The final patch (not for merge) shows how to enable the OV8865 on the Banana Pi Camera Board v2 with the Banana Pi M3. Changes since v3: - Fixed error label goto after runtime pm calls in probe; - Fixed variables names in macros using container_of; - Set ctrls flags after handler error check; - Removed useless ret initializations and gotos; - Removed call to v4l2_device_unregister_subdev. Changes since v2: - Added link-frequencies endpoint property support; - Marked avdd-supply as non-optional (no internal regulator); - Used NULL ctrl ops for pixel rate and link freq; - Extra cosmetic changes. Changes since v1: - Used runtime pm; - Used assigned-clock-rate; - Removed clock name; - Returned closest size in set_fmt; - Removed unneeded references to v4l2 controls; - Removed unneeded structure packing attribute; - Removed i2c device table; - Dual-licensed bindings; - Used SPDX tags. Cheers, Paul Kévin L'hôpital (1): ARM: dts: sun8i: a83t: bananapi-m3: Enable MIPI CSI-2 with OV8865 Paul Kocialkowski (2): dt-bindings: media: i2c: Add OV8865 bindings documentation media: i2c: Add support for the OV8865 image sensor .../bindings/media/i2c/ovti,ov8865.yaml | 124 + arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 102 + drivers/media/i2c/Kconfig | 13 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/ov8865.c | 2972 +++++++++++++++++ 5 files changed, 3212 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml create mode 100644 drivers/media/i2c/ov8865.c -- 2.29.2
