From: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@xxxxxxxxx> Hi, This patch set adds the driver for Intel Keem Bay SoC timer block, which contains 32-bit general purpose timers, a 64 bit free running counter. Patch 1 holds the Device Tree binding documentation and Patch 2 holds the Device Driver for clocksource and clockevent. It was tested on the Keem Bay evaluation module board. Thanks, Vijay Changes since v1: - Add support for KEEMBAY_TIMER to get selected through Kconfig.platforms. - Add CLOCK_EVT_FEAT_DYNIRQ as part of clockevent feature. - Avoid overlapping reg regions across 2 device nodes. - Simplify 2 device nodes as 1 because both are from same IP block. - Adapt the driver code according to the new simplified devicetree. Vijayakannan Ayyathurai (2): dt-bindings: timer: Add bindings for Intel Keem Bay SoC timer clocksource: Add Intel Keem Bay Timer Support .../bindings/timer/intel,keembay-timer.yaml | 52 ++++ arch/arm64/Kconfig.platforms | 1 + drivers/clocksource/Kconfig | 10 + drivers/clocksource/Makefile | 1 + drivers/clocksource/timer-keembay.c | 225 ++++++++++++++++++ 5 files changed, 289 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml create mode 100644 drivers/clocksource/timer-keembay.c base-commit: 5c8fe583cce542aa0b84adc939ce85293de36e5e prerequisite-patch-id: bbb340c3a34059ea6960e8b96f5ad3bf0b4ae7b0 prerequisite-patch-id: b71b548284a57a38ce96d9bb523eadfccabd6e02 -- 2.17.1
