On Wed, Dec 23, 2020 at 04:33:41PM +0530, Jagan Teki wrote: > Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier > board. > > Genaral features: > - Ethernet 10/100 > - Wifi/BT > - USB Type A/OTG > - Audio Out > - CAN > - LVDS panel connector > > i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. > > i.Core MX8M Mini needs to mount on top of this Carrier board for > creating complete i.Core MX8M Mini C.TOUCH 2.0 board. > > Add support for it. > > Signed-off-by: Matteo Lisi <matteo.lisi@xxxxxxxxxxx> > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> > --- > Changes for v3: > - don't maintain common nodes and include it, if no feature diff > Changes for v2: > - enabled fec1 node > - updated commit message > - dropped engicam from filename since it aligned with imx6 engicam > dts files naming conventions. > - add i2c nodes > - fixed v1 comments > > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../dts/freescale/imx8mm-engicam-ctouch2.dtsi | 82 +++++++++++++++++++ > .../freescale/imx8mm-icore-mx8mm-ctouch2.dts | 21 +++++ > 3 files changed, 104 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-engicam-ctouch2.dtsi You split some common part to ctouch2.dtsi so it can be reused in multiple places. I saw so far only one usage, where are the others? Best regards, Krzysztof
