This is the initial series to support Engicam i.Core MX8M Mini SOM and it's associated carrier board dts(i) support. i.Core MX8M Mini is an EDIMM SOM based on NXP i.MX8MM from Engicam. i.Core MX8M Mini needs to mount on top of Engicam baseboards for creating complete platform boards. Possible baseboards are, - EDIMM2.2 - C.TOUCH 2.0 Changes for v3: - don't maintain common nodes and include it, if no feature diff - keep min/max regulator hoping - collect Krzysztof r-b - fix dt-bindings Any inputs? Jagan. Jagan Teki (6): arm64: defconfig: Enable REGULATOR_PF8X00 dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini C.TOUCH 2.0 arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoM arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0 dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit .../devicetree/bindings/arm/fsl.yaml | 8 + arch/arm64/boot/dts/freescale/Makefile | 2 + .../dts/freescale/imx8mm-engicam-ctouch2.dtsi | 82 +++++++ .../freescale/imx8mm-engicam-edimm2.2.dtsi | 82 +++++++ .../freescale/imx8mm-icore-mx8mm-ctouch2.dts | 21 ++ .../freescale/imx8mm-icore-mx8mm-edimm2.2.dts | 21 ++ .../dts/freescale/imx8mm-icore-mx8mm.dtsi | 232 ++++++++++++++++++ arch/arm64/configs/defconfig | 1 + 8 files changed, 449 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-engicam-ctouch2.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-engicam-edimm2.2.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi -- 2.25.1
