A dummy zero bit is sent preceding the data during a read transfer by the Microchip 93LC46B eeprom (section 2.7 of[1]). This results in right shift of data during a read. In order to ignore this bit a quirk can be added to send an extra zero bit after the read address. Add a quirk to ignore the zero bit sent before data by adding a zero bit after the read address. [1] - https://www.mouser.com/datasheet/2/268/20001749K-277859.pdf Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx> --- drivers/misc/eeprom/eeprom_93xx46.c | 15 +++++++++++++++ include/linux/eeprom_93xx46.h | 2 ++ 2 files changed, 17 insertions(+) diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c index 7c45f82b4302..b144e7981f36 100644 --- a/drivers/misc/eeprom/eeprom_93xx46.c +++ b/drivers/misc/eeprom/eeprom_93xx46.c @@ -35,6 +35,10 @@ static const struct eeprom_93xx46_devtype_data atmel_at93c46d_data = { EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH, }; +static const struct eeprom_93xx46_devtype_data microchip_93LC46B_data = { + .quirks = EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE, +}; + struct eeprom_93xx46_dev { struct spi_device *spi; struct eeprom_93xx46_platform_data *pdata; @@ -55,6 +59,11 @@ static inline bool has_quirk_instruction_length(struct eeprom_93xx46_dev *edev) return edev->pdata->quirks & EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH; } +static inline bool has_quirk_extra_read_cycle(struct eeprom_93xx46_dev *edev) +{ + return edev->pdata->quirks & EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE; +} + static int eeprom_93xx46_read(void *priv, unsigned int off, void *val, size_t count) { @@ -96,6 +105,11 @@ static int eeprom_93xx46_read(void *priv, unsigned int off, dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n", cmd_addr, edev->spi->max_speed_hz); + if (has_quirk_extra_read_cycle(edev)) { + cmd_addr <<= 1; + bits += 1; + } + spi_message_init(&m); t[0].tx_buf = (char *)&cmd_addr; @@ -363,6 +377,7 @@ static void select_deassert(void *context) static const struct of_device_id eeprom_93xx46_of_table[] = { { .compatible = "eeprom-93xx46", }, { .compatible = "atmel,at93c46d", .data = &atmel_at93c46d_data, }, + { .compatible = "microchip,93LC46B", .data = µchip_93LC46B_data, }, {} }; MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table); diff --git a/include/linux/eeprom_93xx46.h b/include/linux/eeprom_93xx46.h index eec7928ff8fe..99580c22f91a 100644 --- a/include/linux/eeprom_93xx46.h +++ b/include/linux/eeprom_93xx46.h @@ -16,6 +16,8 @@ struct eeprom_93xx46_platform_data { #define EEPROM_93XX46_QUIRK_SINGLE_WORD_READ (1 << 0) /* Instructions such as EWEN are (addrlen + 2) in length. */ #define EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH (1 << 1) +/* Add extra cycle after address during a read */ +#define EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE BIT(2) /* * optional hooks to control additional logic -- 2.17.1
