Hi Adam,
On Sun, Dec 13, 2020 at 7:38 PM Adam Ford <aford173@xxxxxxxxx> wrote:
> Beacon EmebeddedWorks is introducing a new kit based on the
> RZ/G2N SoC from Renesas.
>
> The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1
> cellular radio.
>
> The Baseboard has Ethernet, USB, HDMI, stereo audio in and out,
> along with a variety of push buttons and LED's, and support for
> a parallel RGB and an LVDS display. It uses the same baseboard
> and SOM as the RZ/G2M.
>
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
Thanks for your patch!
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
> @@ -0,0 +1,43 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2020, Compass Electronics Group, LLC
> + */
> +
> +/dts-v1/;
> +
> +#include "r8a774b1.dtsi"
> +#include "beacon-renesom-som.dtsi"
> +#include "beacon-renesom-baseboard.dtsi"
> +
> +/ {
> + model = "Beacon Embedded Works RZ/G2N Development Kit";
> + compatible = "beacon,beacon-rzg2n", "renesas,r8a774b1";
> +
> + aliases {
> + serial0 = &scif2;
> + serial1 = &hscif0;
> + serial2 = &hscif1;
> + serial3 = &scif0;
> + serial4 = &hscif2;
> + serial5 = &scif5;
> + serial6 = &scif4;
> + ethernet0 = &avb;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
No memory nodes? Are you relying on U-Boot to fill them in?
If yes, why do you have them in the other board DTS files?
> +};
> +
> +&du {
> + status = "okay";
Missing pinctrl properties?
> +
> + clocks = <&cpg CPG_MOD 724>,
> + <&cpg CPG_MOD 723>,
> + <&cpg CPG_MOD 721>,
> + <&versaclock5 1>,
> + <&x302_clk>,
> + <&versaclock5 2>;
> + clock-names = "du.0", "du.1", "du.3",
> + "dclkin.0", "dclkin.1", "dclkin.3";
> +};
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
