This property seems useless because we can use the
regulator-max-microamp generic property to do the same
and using generic code.
The only things it changes is the default value. The original
code was using "2100" (mA) as default, but I think we should
keep the value in the OTP memory as the default one. This value
is automatically loaded in the register by the chip.
Signed-off-by: Adrien Grassein <adrien.grassein@xxxxxxxxx>
---
drivers/regulator/pf8x00-regulator.c | 89 +++++++++++++++-------------
1 file changed, 48 insertions(+), 41 deletions(-)
diff --git a/drivers/regulator/pf8x00-regulator.c b/drivers/regulator/pf8x00-regulator.c
index 308c27fa6ea8..335aa77ef5fc 100644
--- a/drivers/regulator/pf8x00-regulator.c
+++ b/drivers/regulator/pf8x00-regulator.c
@@ -150,6 +150,11 @@ static const int pf8x00_ldo_voltages[] = {
3100000, 3150000, 3200000, 3300000, 3350000, 1650000, 1700000, 5000000,
};
+/* Output: 2.1A to 4.5A */
+static const unsigned int pf8x00_sw_current_table[] = {
+ 2100000, 2600000, 3000000, 4500000,
+};
+
#define SWV(i) (6250 * i + 400000)
#define SWV_LINE(i) SWV(i*8+0), SWV(i*8+1), SWV(i*8+2), SWV(i*8+3), \
SWV(i*8+4), SWV(i*8+5), SWV(i*8+6), SWV(i*8+7)
@@ -199,32 +204,6 @@ static struct pf8x00_regulator *desc_to_regulator(const struct regulator_desc *d
return container_of(desc, struct pf8x00_regulator, desc);
}
-static void swxilim_select(const struct regulator_desc *desc, int ilim)
-{
- struct pf8x00_regulator *data = desc_to_regulator(desc);
- u8 ilim_sel;
-
- switch (ilim) {
- case 2100:
- ilim_sel = SWXILIM_2100_MA;
- break;
- case 2600:
- ilim_sel = SWXILIM_2600_MA;
- break;
- case 3000:
- ilim_sel = SWXILIM_3000_MA;
- break;
- case 4500:
- ilim_sel = SWXILIM_4500_MA;
- break;
- default:
- ilim_sel = SWXILIM_2100_MA;
- break;
- }
-
- data->ilim = ilim_sel;
-}
-
static int pf8x00_of_parse_cb(struct device_node *np,
const struct regulator_desc *desc,
struct regulator_config *config)
@@ -235,13 +214,6 @@ static int pf8x00_of_parse_cb(struct device_node *np,
int val;
int ret;
- ret = of_property_read_u32(np, "nxp,ilim-ma", &val);
- if (ret)
- dev_dbg(chip->dev, "unspecified ilim for BUCK%d, use 2100 mA\n",
- desc->id - PF8X00_LDO4);
-
- swxilim_select(desc, val);
-
ret = of_property_read_u32(np, "nxp,phase-shift", &val);
if (ret) {
dev_dbg(chip->dev,
@@ -272,7 +244,18 @@ static const struct regulator_ops pf8x00_ldo_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
};
-static const struct regulator_ops pf8x00_buck_ops = {
+static const struct regulator_ops pf8x00_buck1_6_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .get_current_limit = regulator_get_current_limit_regmap,
+ .set_current_limit = regulator_set_current_limit_regmap,
+};
+
+static const struct regulator_ops pf8x00_buck7_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -319,14 +302,42 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
.of_match = _name, \
.regulators_node = "regulators", \
.of_parse_cb = pf8x00_of_parse_cb, \
- .n_voltages = ARRAY_SIZE(voltages), \
- .ops = &pf8x00_buck_ops, \
+ .n_voltages = PF8XOO_SW1_6_VOLTAGE_NUM, \
+ .ops = &pf8x00_buck1_6_ops, \
.type = REGULATOR_VOLTAGE, \
.id = PF8X00_BUCK ## _id, \
.owner = THIS_MODULE, \
.volt_table = voltages, \
.vsel_reg = (base) + SW_RUN_VOLT, \
.vsel_mask = 0xff, \
+ .curr_table = pf8x00_sw_current_table, \
+ .n_current_limits = \
+ ARRAY_SIZE(pf8x00_sw_current_table), \
+ .csel_reg = (base) + SW_CONFIG2, \
+ .csel_mask = PF8X00_SWXILIM_MASK, \
+ .enable_reg = (base) + SW_MODE1, \
+ .enable_val = 0x3, \
+ .disable_val = 0x0, \
+ .enable_mask = 0x3, \
+ .enable_time = 500, \
+ }, \
+ }
+
+#define PF8X00BUCK7(_name, base, voltages) \
+ [PF8X00_BUCK7] = { \
+ .desc = { \
+ .name = _name, \
+ .of_match = _name, \
+ .regulators_node = "regulators", \
+ .of_parse_cb = pf8x00_of_parse_cb, \
+ .n_voltages = ARRAY_SIZE(voltages), \
+ .ops = &pf8x00_buck7_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = PF8X00_BUCK7, \
+ .owner = THIS_MODULE, \
+ .volt_table = voltages, \
+ .vsel_reg = (base) + SW_RUN_VOLT, \
+ .vsel_mask = 0xff, \
.enable_reg = (base) + SW_MODE1, \
.enable_val = 0x3, \
.disable_val = 0x0, \
@@ -363,7 +374,7 @@ static struct pf8x00_regulator pf8x00_regulators_data[PF8X00_MAX_REGULATORS] = {
PF8X00BUCK(4, "buck4", PF8X00_SW_BASE(PF8X00_BUCK4), pf8x00_sw1_to_6_voltages),
PF8X00BUCK(5, "buck5", PF8X00_SW_BASE(PF8X00_BUCK5), pf8x00_sw1_to_6_voltages),
PF8X00BUCK(6, "buck6", PF8X00_SW_BASE(PF8X00_BUCK6), pf8x00_sw1_to_6_voltages),
- PF8X00BUCK(7, "buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages),
+ PF8X00BUCK7("buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages),
PF8X00VSNVS("vsnvs", PF8X00_VSNVS_CONFIG1, pf8x00_vsnvs_voltages),
};
@@ -458,10 +469,6 @@ static int pf8x00_i2c_probe(struct i2c_client *client)
regmap_update_bits(chip->regmap, reg,
PF8X00_SWXPHASE_MASK,
data->phase_shift);
-
- regmap_update_bits(chip->regmap, reg,
- PF8X00_SWXILIM_MASK,
- data->ilim << PF8X00_SWXILIM_SHIFT);
}
}
--
2.20.1
