Re: [PATCH 0/3] Deterministic UART numbering on Samsung SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, Jun 26, 2014 at 01:24:32PM +0200, Tomasz Figa wrote:
> Current Samsung UART driver relies on probe order of particular
> samsung-uart instances, which makes it impossible to get proper
> initialization of ports when not all ports are available on board,
> not even saying of deterministic device naming.
> 
> This series intends to fix this situation by adding support to parse
> aliases from device tree and use them to assign instance IDs to
> particular port instances.

How about instead exporting the path/id information so that userspace
can create /dev/serial/by-{path,id}/... for internal devices instead?

The problem you're raising is very much the same problem you have when
there are multiple USB serial devices connected to the machine - you
just get a bunch of /dev/ttyUSB* devices which are unordered (they can
change on each boot, or change order if you disconnect and reconnect
them.)

/dev/serial/by-{path,id}/ allows for a much more stable path.

-- 
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux