Current Samsung UART driver relies on probe order of particular samsung-uart instances, which makes it impossible to get proper initialization of ports when not all ports are available on board, not even saying of deterministic device naming. This series intends to fix this situation by adding support to parse aliases from device tree and use them to assign instance IDs to particular port instances. Tested on Exynos4412-based Trats2 board: 1) without patch 3/3 adding aliases, 2) with patch 3/3 with all UART ports enabled, 3) with patch 3/3 with selected UART ports disabled. Tomasz Figa (3): Documentation: devicetree: Update samsung UART bindings serial: samsung: Consider DT alias when probing ports ARM: dts: SAMSUNG: Add aliases of UART nodes .../devicetree/bindings/serial/samsung_uart.txt | 52 +++++++++++++++++++--- arch/arm/boot/dts/exynos3250.dtsi | 2 + arch/arm/boot/dts/exynos4.dtsi | 12 +++-- arch/arm/boot/dts/exynos5.dtsi | 15 +++++-- arch/arm/boot/dts/exynos5260.dtsi | 4 ++ arch/arm/boot/dts/exynos5410.dtsi | 6 +++ arch/arm/boot/dts/exynos5440.dtsi | 6 ++- arch/arm/boot/dts/s3c2416.dtsi | 6 ++- arch/arm/boot/dts/s3c24xx.dtsi | 9 ++-- arch/arm/boot/dts/s3c64xx.dtsi | 4 ++ drivers/tty/serial/samsung.c | 13 ++++-- 11 files changed, 106 insertions(+), 23 deletions(-) -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html