Add a property dynamic-power-coefficient which allows to register Energy Model for the Mali Midgard devices. Signed-off-by: Lukasz Luba <lukasz.luba@xxxxxxx> --- .../bindings/gpu/arm,mali-midgard.yaml | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml index e9c42b59f30f..696c17aedbbe 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -90,6 +90,23 @@ properties: dma-coherent: true + dynamic-power-coefficient: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + A u32 value that represents the running time dynamic + power coefficient in units of uW/MHz/V^2. The + coefficient can either be calculated from power + measurements or derived by analysis. + + The dynamic power consumption of the GPU is + proportional to the square of the Voltage (V) and + the clock frequency (f). The coefficient is used to + calculate the dynamic power as below - + + Pdyn = dynamic-power-coefficient * V^2 * f + + where voltage is in V, frequency is in MHz. + required: - compatible - reg -- 2.17.1
