On Mon, 07 Dec 2020 15:27:55 +0100, Michael Klein wrote: > Add devicetree binding documentation for regulator-poweroff driver. > > Signed-off-by: Michael Klein <michael@xxxxxxxxxxxx> > --- > .../power/reset/regulator-poweroff.yaml | 53 +++++++++++++++++++ > 1 file changed, 53 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/reset/regulator-poweroff.example.dt.yaml: regulator-poweroff: 'REGULATOR-supply' is a required property From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/reset/regulator-poweroff.example.dt.yaml: regulator-poweroff: 'vcc-dram-supply', 'vcc1v2-supply' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml See https://patchwork.ozlabs.org/patch/1412084 The base for the patch is generally the last rc1. Any dependencies should be noted. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
