From: Rafał Miłecki <rafal@xxxxxxxxxx>
BCM4908 has controller that needs different IRQ handling just like the
BCM63138. Describe it properly.
On Linux this change fixes:
brcmstb_nand ff801800.nand: timeout waiting for command 0x9
brcmstb_nand ff801800.nand: intfc status d0000000
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index f873dc44ce9c..55d9b56ac749 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -164,7 +164,7 @@ uart0: serial@640 {
nand@1800 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
+ compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
reg = <0x1800 0x600>, <0x2000 0x10>;
reg-names = "nand", "nand-int-base";
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
--
2.26.2
