According to the datasheet (Rev. 1.9) the RTL8211F requires at least 72ms "for internal circuits settling time" before accessing the PHY registers. On similar boards with the same PHY this fixes an issue where Ethernet link would not come up when using ip link set down/up. Fixes: ed5e8f689154 ("arm64: dts: meson: g12a: x96-max: fix the Ethernet PHY reset line") Reviewed-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> Signed-off-by: Stefan Agner <stefan@xxxxxxxx> --- arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 1b07c8c06eac..463a72d6bb7c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -340,7 +340,7 @@ external_phy: ethernet-phy@0 { eee-broken-1000t; reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; interrupt-parent = <&gpio_intc>; -- 2.29.2