[PATCH 1/2] dt-bindings: regulator: Add pf8x00 regulator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add dt-bindings for the pf8x00 driver.

Signed-off-by: Adrien Grassein <adrien.grassein@xxxxxxxxx>
---
 .../regulator/nxp,pf8x00-regulator.yaml       | 223 ++++++++++++++++++
 MAINTAINERS                                   |   6 +
 2 files changed, 229 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml

diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
new file mode 100644
index 000000000000..f4e4f545c5a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/nxp,pf8x00-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PF8x00 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Adrien Grassein <adrien.grassein@xxxxxxxxx>
+
+description: |
+  pf8x00 are a 12-chanel regulator PMIC family. Regulators nodes should
+  be named to ldo<>, sw<> and vnss. The definition for each of these nodes
+  is defined using the standard binding for regulators at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+  Datasheet is available at https://www.nxp.com/docs/en/data-sheet/PF8100_PF8200.pdf
+
+properties:
+  compatible:
+    enum:
+      - nxp,pf8x00
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller
+
+    patternProperties:
+      "^ldo[1-4]$":
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          Properties for single LDO regulator.
+
+        properties:
+          regulator-name:
+            pattern: "^ldo[1-4]$"
+            description: |
+              should be ldo1", ..., "ldo4"
+
+          nxp,hw-en:
+            $ref: /schemas/types.yaml#definitions/flag
+            description: |
+              Only available for ldo2. Used to enable or disable ld02.
+
+          nxp,vselect-en:
+            $ref: /schemas/types.yaml#definitions/flag
+            description: |
+              Only available for ldo2. When specified, use the VSELECT pin
+              of the chip to control the output voltage of the ldo02 regulator.
+
+        unevaluatedProperties: false
+
+      "^sw[1-7]$":
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          Properties for single SW regulator.
+
+        properties:
+          regulator-name:
+            pattern: "^sw[1-7]$"
+            description: |
+              should be sw1", ..., "sw7"
+
+          nxp,ilim-ma:
+            $ref: /schemas/types.yaml#definitions/uint32
+            minimum: 2100
+            maximum: 4500
+            default: 2100
+            enum: [ 2100, 2600, 3000, 4500 ]
+            description: |
+              Defines the maximum current delivered by the regulator (in mA).
+
+          nxp,phase:
+            $ref: /schemas/types.yaml#definitions/uint32
+            minimum: 0
+            maximum: 315
+            default: 0
+            enum: [ 0, 45, 90, 135, 180, 225, 270, 315 ]
+            description: |
+               This controls the phase shift of the switching frequency.
+
+          nxp,fsl,fast-slew:
+            $ref: /schemas/types.yaml#definitions/flag
+            description: |
+              Controls the DVS ramp of the regulator.
+
+          nxp,quad-phase:
+            $ref: /schemas/types.yaml#definitions/flag
+            description: |
+              This allow regulators  sw1 and sw2, or sw3 and sw4 or sw4 and sw5
+              to work together to deliver a maximum 10A current.
+
+          nxp,dual-phase:
+            $ref: /schemas/types.yaml#definitions/flag
+            description: |
+              This allow regulators  sw1, sw2, sw3 and sw4 to work together
+              to deliver a maximum 5A current.
+
+        unevaluatedProperties: false
+
+      "^vsnvs$":
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          Properties for vsnvs regulator.
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic: pf8100@8 {
+        compatible = "nxp,pf8x00";
+        reg = <0x08>;
+
+        regulators {
+            reg_ldo1: ldo1 {
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <5000000>;
+              regulator-min-microvolt = <1500000>;
+            };
+
+            reg_ldo2: ldo2 {
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <5000000>;
+              regulator-min-microvolt = <1500000>;
+            };
+
+            reg_ldo3: ldo3 {
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <5000000>;
+              regulator-min-microvolt = <1500000>;
+            };
+
+            reg_ldo4: ldo4 {
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <5000000>;
+              regulator-min-microvolt = <1500000>;
+            };
+
+            reg_sw1: sw1 {
+              nxp,phase = <0>;
+              nxp,ilim-ma = <4500>;
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <1800000>;
+              regulator-min-microvolt =  <400000>;
+            };
+
+            reg_sw2: sw2 {
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <1800000>;
+              regulator-min-microvolt =  <400000>;
+            };
+
+            reg_sw3: sw3 {
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <1800000>;
+              regulator-min-microvolt =  <400000>;
+              nxp,fast-slew = <1>;
+            };
+
+            reg_sw4: sw4 {
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <1800000>;
+              regulator-min-microvolt =  <400000>;
+              nxp,fast-slew = <1>;
+            };
+
+            reg_sw5: sw5 {
+              regulator-always-on;
+              regulator-boot-on;
+              regulator-max-microvolt = <1800000>;
+              regulator-min-microvolt =  <400000>;
+            };
+
+           reg_sw6: sw6 {
+             regulator-always-on;
+             regulator-boot-on;
+             regulator-max-microvolt = <1800000>;
+             regulator-min-microvolt =  <400000>;
+           };
+
+           reg_sw7: sw7 {
+             regulator-always-on;
+             regulator-boot-on;
+             regulator-max-microvolt = <4100000>;
+             regulator-min-microvolt = <1000000>;
+           };
+
+          reg_vsnvs: vsnvs {
+            regulator-always-on;
+            regulator-boot-on;
+            regulator-max-microvolt = <3300000>;
+            regulator-min-microvolt = <1800000>;
+          };
+        };
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index ebe4829cdd4d..4e266f1e9a2f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13730,6 +13730,12 @@ S:	Maintained
 F:	include/linux/personality.h
 F:	include/uapi/linux/personality.h
 
+PF8x00 PMIC REGULATORS DRIVERS
+M:	Adrien Grassein <adrien.grassein@xxxxxxxxx>
+L:	linux-kernel@xxxxxxxxxxxxxxx
+S:	Maintained
+F:	Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
+
 PHOENIX RC FLIGHT CONTROLLER ADAPTER
 M:	Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
 L:	linux-input@xxxxxxxxxxxxxxx
-- 
2.20.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux