Re: [PATCH v2 2/6] remoteproc/pru: Add a PRU remoteproc driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mathieu, Suman

On Fri, 4 Dec 2020 at 00:43, Suman Anna <s-anna@xxxxxx> wrote:
>
> Hi Mathieu,
>
> On 12/2/20 3:13 PM, Mathieu Poirier wrote:
> > On Wed, Dec 02, 2020 at 01:53:36PM -0700, Mathieu Poirier wrote:
> >> On Tue, Dec 01, 2020 at 03:54:36PM -0700, Mathieu Poirier wrote:
> >>> Hi Grzeg,
> >>>
> >>> I have started to review this set - comments will come over the next few days.
> >>>
> >>> See below for a start.
> >>>
> >>> On Thu, Nov 19, 2020 at 03:08:46PM +0100, Grzegorz Jaszczyk wrote:
> >>>> From: Suman Anna <s-anna@xxxxxx>
> >>>>
> >>>> The Programmable Real-Time Unit Subsystem (PRUSS) consists of
> >>>> dual 32-bit RISC cores (Programmable Real-Time Units, or PRUs)
> >>>> for program execution. This patch adds a remoteproc platform
> >>>> driver for managing the individual PRU RISC cores life cycle.
> >>>>
> >>>> The PRUs do not have a unified address space (have an Instruction
> >>>> RAM and a primary Data RAM at both 0x0). The PRU remoteproc driver
> >>>> therefore uses a custom remoteproc core ELF loader ops. The added
> >>>> .da_to_va ops is only used to provide translations for the PRU
> >>>> Data RAMs. This remoteproc driver does not have support for error
> >>>> recovery and system suspend/resume features. Different compatibles
> >>>> are used to allow providing scalability for instance-specific device
> >>>> data if needed. The driver uses a default firmware-name retrieved
> >>>> from device-tree for each PRU core, and the firmwares are expected
> >>>> to be present in the standard Linux firmware search paths. They can
> >>>> also be adjusted by userspace if required through the sysfs interface
> >>>> provided by the remoteproc core.
> >>>>
> >>>> The PRU remoteproc driver uses a client-driven boot methodology: it
> >>>> does _not_ support auto-boot so that the PRU load and boot is dictated
> >>>> by the corresponding client drivers for achieving various usecases.
> >>>> This allows flexibility for the client drivers or applications to set
> >>>> a firmware name (if needed) based on their desired functionality and
> >>>> boot the PRU. The sysfs bind and unbind attributes have also been
> >>>> suppressed so that the PRU devices cannot be unbound and thereby
> >>>> shutdown a PRU from underneath a PRU client driver.
> >>>>
> >>>> The driver currently supports the AM335x, AM437x, AM57xx and 66AK2G
> >>>> SoCs, and support for other TI SoCs will be added in subsequent
> >>>> patches.
> >>>>
> >>>> Co-developed-by: Andrew F. Davis <afd@xxxxxx>
> >>>> Signed-off-by: Andrew F. Davis <afd@xxxxxx>
> >>>> Signed-off-by: Suman Anna <s-anna@xxxxxx>
> >>>> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
> >>>> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
> >>>> ---
> >>>> v1->v2:
> >>>> - Use PRU_IRAM_ADDR_MASK definition instead of raw 0x3ffff.
> >>>> - Convert 'len' argument from int to size_t type in all *da_to_va.
> >>>> - Return 0 in case of missing .resource_table for pru_rproc_parse_fw()
> >>>>   (move the logic from patch #3 where it was corrected).
> >>>> ---
> >>>>  drivers/remoteproc/Kconfig     |  12 +
> >>>>  drivers/remoteproc/Makefile    |   1 +
> >>>>  drivers/remoteproc/pru_rproc.c | 435 +++++++++++++++++++++++++++++++++
> >>>>  3 files changed, 448 insertions(+)
> >>>>  create mode 100644 drivers/remoteproc/pru_rproc.c
> >>>>
> >>>> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> >>>> index d99548fb5dde..3e3865a7cd78 100644
> >>>> --- a/drivers/remoteproc/Kconfig
> >>>> +++ b/drivers/remoteproc/Kconfig
> >>>> @@ -125,6 +125,18 @@ config KEYSTONE_REMOTEPROC
> >>>>      It's safe to say N here if you're not interested in the Keystone
> >>>>      DSPs or just want to use a bare minimum kernel.
> >>>>
> >>>> +config PRU_REMOTEPROC
> >>>> +  tristate "TI PRU remoteproc support"
> >>>> +  depends on TI_PRUSS
> >>>> +  default TI_PRUSS
> >>>> +  help
> >>>> +    Support for TI PRU remote processors present within a PRU-ICSS
> >>>> +    subsystem via the remote processor framework.
> >>>> +
> >>>> +    Say Y or M here to support the Programmable Realtime Unit (PRU)
> >>>> +    processors on various TI SoCs. It's safe to say N here if you're
> >>>> +    not interested in the PRU or if you are unsure.
> >>>> +
> >>>>  config QCOM_PIL_INFO
> >>>>    tristate
> >>>>
> >>>> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> >>>> index da2ace4ec86c..bb26c9e4ef9c 100644
> >>>> --- a/drivers/remoteproc/Makefile
> >>>> +++ b/drivers/remoteproc/Makefile
> >>>> @@ -18,6 +18,7 @@ obj-$(CONFIG_OMAP_REMOTEPROC)            += omap_remoteproc.o
> >>>>  obj-$(CONFIG_WKUP_M3_RPROC)               += wkup_m3_rproc.o
> >>>>  obj-$(CONFIG_DA8XX_REMOTEPROC)            += da8xx_remoteproc.o
> >>>>  obj-$(CONFIG_KEYSTONE_REMOTEPROC) += keystone_remoteproc.o
> >>>> +obj-$(CONFIG_PRU_REMOTEPROC)              += pru_rproc.o
> >>>>  obj-$(CONFIG_QCOM_PIL_INFO)               += qcom_pil_info.o
> >>>>  obj-$(CONFIG_QCOM_RPROC_COMMON)           += qcom_common.o
> >>>>  obj-$(CONFIG_QCOM_Q6V5_COMMON)            += qcom_q6v5.o
> >>>> diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
> >>>> new file mode 100644
> >>>> index 000000000000..b686f19f9b1a
> >>>> --- /dev/null
> >>>> +++ b/drivers/remoteproc/pru_rproc.c
> >>>> @@ -0,0 +1,435 @@
> >>>> +// SPDX-License-Identifier: GPL-2.0-only
> >>>> +/*
> >>>> + * PRU-ICSS remoteproc driver for various TI SoCs
> >>>> + *
> >>>> + * Copyright (C) 2014-2020 Texas Instruments Incorporated - https://www.ti.com/
> >>>> + *
> >>>> + * Author(s):
> >>>> + *        Suman Anna <s-anna@xxxxxx>
> >>>> + *        Andrew F. Davis <afd@xxxxxx>
> >>>> + *        Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx> for Texas Instruments
> >>>> + */
> >>>> +
> >>>> +#include <linux/bitops.h>
> >>>> +#include <linux/module.h>
> >>>> +#include <linux/of_device.h>
> >>>> +#include <linux/pruss_driver.h>
> >>>> +#include <linux/remoteproc.h>
> >>>> +
> >>>> +#include "remoteproc_internal.h"
> >>>> +#include "remoteproc_elf_helpers.h"
> >>>> +
> >>>> +/* PRU_ICSS_PRU_CTRL registers */
> >>>> +#define PRU_CTRL_CTRL             0x0000
> >>>> +#define PRU_CTRL_STS              0x0004
> >>>> +
> >>>> +/* CTRL register bit-fields */
> >>>> +#define CTRL_CTRL_SOFT_RST_N      BIT(0)
> >>>> +#define CTRL_CTRL_EN              BIT(1)
> >>>> +#define CTRL_CTRL_SLEEPING        BIT(2)
> >>>> +#define CTRL_CTRL_CTR_EN  BIT(3)
> >>>> +#define CTRL_CTRL_SINGLE_STEP     BIT(8)
> >>>> +#define CTRL_CTRL_RUNSTATE        BIT(15)
> >>>> +
> >>>> +/* PRU Core IRAM address masks */
> >>>> +#define PRU_IRAM_ADDR_MASK        0x3ffff
> >>>> +#define PRU0_IRAM_ADDR_MASK       0x34000
> >>>> +#define PRU1_IRAM_ADDR_MASK       0x38000
> >>>> +
> >>>> +/* PRU device addresses for various type of PRU RAMs */
> >>>> +#define PRU_IRAM_DA       0       /* Instruction RAM */
> >>>> +#define PRU_PDRAM_DA      0       /* Primary Data RAM */
> >>>> +#define PRU_SDRAM_DA      0x2000  /* Secondary Data RAM */
> >>>> +#define PRU_SHRDRAM_DA    0x10000 /* Shared Data RAM */
> >>>> +
> >>>> +/**
> >>>> + * enum pru_iomem - PRU core memory/register range identifiers
> >>>> + *
> >>>> + * @PRU_IOMEM_IRAM: PRU Instruction RAM range
> >>>> + * @PRU_IOMEM_CTRL: PRU Control register range
> >>>> + * @PRU_IOMEM_DEBUG: PRU Debug register range
> >>>> + * @PRU_IOMEM_MAX: just keep this one at the end
> >>>> + */
> >>>> +enum pru_iomem {
> >>>> +  PRU_IOMEM_IRAM = 0,
> >>>> +  PRU_IOMEM_CTRL,
> >>>> +  PRU_IOMEM_DEBUG,
> >>>> +  PRU_IOMEM_MAX,
> >>>> +};
> >>>> +
> >>>> +/**
> >>>> + * struct pru_rproc - PRU remoteproc structure
> >>>> + * @id: id of the PRU core within the PRUSS
> >>>> + * @dev: PRU core device pointer
> >>>> + * @pruss: back-reference to parent PRUSS structure
> >>>> + * @rproc: remoteproc pointer for this PRU core
> >>>> + * @mem_regions: data for each of the PRU memory regions
> >>>> + * @fw_name: name of firmware image used during loading
> >>>> + */
> >>>> +struct pru_rproc {
> >>>> +  int id;
> >>>> +  struct device *dev;
> >>>> +  struct pruss *pruss;
> >>>> +  struct rproc *rproc;
> >>>> +  struct pruss_mem_region mem_regions[PRU_IOMEM_MAX];
> >>>> +  const char *fw_name;
> >>>> +};
> >>>> +
> >>>> +static inline u32 pru_control_read_reg(struct pru_rproc *pru, unsigned int reg)
> >>>> +{
> >>>> +  return readl_relaxed(pru->mem_regions[PRU_IOMEM_CTRL].va + reg);
> >>>> +}
> >>>> +
> >>>> +static inline
> >>>> +void pru_control_write_reg(struct pru_rproc *pru, unsigned int reg, u32 val)
> >>>> +{
> >>>> +  writel_relaxed(val, pru->mem_regions[PRU_IOMEM_CTRL].va + reg);
> >>>> +}
> >>>> +
> >>>> +static int pru_rproc_start(struct rproc *rproc)
> >>>> +{
> >>>> +  struct device *dev = &rproc->dev;
> >>>> +  struct pru_rproc *pru = rproc->priv;
> >>>> +  u32 val;
> >>>> +
> >>>> +  dev_dbg(dev, "starting PRU%d: entry-point = 0x%llx\n",
> >>>> +          pru->id, (rproc->bootaddr >> 2));
> >>>> +
> >>>> +  val = CTRL_CTRL_EN | ((rproc->bootaddr >> 2) << 16);
> >>>> +  pru_control_write_reg(pru, PRU_CTRL_CTRL, val);
> >>>> +
> >>>> +  return 0;
> >>>> +}
> >>>> +
> >>>> +static int pru_rproc_stop(struct rproc *rproc)
> >>>> +{
> >>>> +  struct device *dev = &rproc->dev;
> >>>> +  struct pru_rproc *pru = rproc->priv;
> >>>> +  u32 val;
> >>>> +
> >>>> +  dev_dbg(dev, "stopping PRU%d\n", pru->id);
> >>>> +
> >>>> +  val = pru_control_read_reg(pru, PRU_CTRL_CTRL);
> >>>> +  val &= ~CTRL_CTRL_EN;
> >>>> +  pru_control_write_reg(pru, PRU_CTRL_CTRL, val);
> >>>> +
> >>>> +  return 0;
> >>>> +}
> >>>> +
> >>>> +/*
> >>>> + * Convert PRU device address (data spaces only) to kernel virtual address.
> >>>> + *
> >>>> + * Each PRU has access to all data memories within the PRUSS, accessible at
> >>>> + * different ranges. So, look through both its primary and secondary Data
> >>>> + * RAMs as well as any shared Data RAM to convert a PRU device address to
> >>>> + * kernel virtual address. Data RAM0 is primary Data RAM for PRU0 and Data
> >>>> + * RAM1 is primary Data RAM for PRU1.
> >>>> + */
> >>>> +static void *pru_d_da_to_va(struct pru_rproc *pru, u32 da, size_t len)
> >>>> +{
> >>>> +  struct pruss_mem_region dram0, dram1, shrd_ram;
> >>>> +  struct pruss *pruss = pru->pruss;
> >>>> +  u32 offset;
> >>>> +  void *va = NULL;
> >>>> +
> >>>> +  if (len == 0)
> >>>> +          return NULL;
> >>>> +
> >>>> +  dram0 = pruss->mem_regions[PRUSS_MEM_DRAM0];
> >>>> +  dram1 = pruss->mem_regions[PRUSS_MEM_DRAM1];
> >>>> +  /* PRU1 has its local RAM addresses reversed */
> >>>> +  if (pru->id == 1)
> >>>> +          swap(dram0, dram1);
> >>>> +  shrd_ram = pruss->mem_regions[PRUSS_MEM_SHRD_RAM2];
> >>>> +
> >>>> +  if (da >= PRU_PDRAM_DA && da + len <= PRU_PDRAM_DA + dram0.size) {
> >>>> +          offset = da - PRU_PDRAM_DA;
> >>>> +          va = (__force void *)(dram0.va + offset);
> >>>> +  } else if (da >= PRU_SDRAM_DA &&
> >>>> +             da + len <= PRU_SDRAM_DA + dram1.size) {
> >>>> +          offset = da - PRU_SDRAM_DA;
> >>>> +          va = (__force void *)(dram1.va + offset);
> >>>> +  } else if (da >= PRU_SHRDRAM_DA &&
> >>>> +             da + len <= PRU_SHRDRAM_DA + shrd_ram.size) {
> >>>> +          offset = da - PRU_SHRDRAM_DA;
> >>>> +          va = (__force void *)(shrd_ram.va + offset);
> >>>> +  }
> >>>> +
> >>>> +  return va;
> >>>> +}
> >>>> +
> >>>> +/*
> >>>> + * Convert PRU device address (instruction space) to kernel virtual address.
> >>>> + *
> >>>> + * A PRU does not have an unified address space. Each PRU has its very own
> >>>> + * private Instruction RAM, and its device address is identical to that of
> >>>> + * its primary Data RAM device address.
> >>>> + */
> >>>> +static void *pru_i_da_to_va(struct pru_rproc *pru, u32 da, size_t len)
> >>>> +{
> >>>> +  u32 offset;
> >>>> +  void *va = NULL;
> >>>> +
> >>>> +  if (len == 0)
> >>>> +          return NULL;
> >>>> +
> >>>> +  if (da >= PRU_IRAM_DA &&
> >>>> +      da + len <= PRU_IRAM_DA + pru->mem_regions[PRU_IOMEM_IRAM].size) {
> >>>> +          offset = da - PRU_IRAM_DA;
> >>>> +          va = (__force void *)(pru->mem_regions[PRU_IOMEM_IRAM].va +
> >>>> +                                offset);
> >>>> +  }
> >>>> +
> >>>> +  return va;
> >>>> +}
> >>>> +
> >>>> +/*
> >>>> + * Provide address translations for only PRU Data RAMs through the remoteproc
> >>>> + * core for any PRU client drivers. The PRU Instruction RAM access is restricted
> >>>> + * only to the PRU loader code.
> >>>> + */
> >>>> +static void *pru_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
> >>>> +{
> >>>> +  struct pru_rproc *pru = rproc->priv;
> >>>> +
> >>>> +  return pru_d_da_to_va(pru, da, len);
> >>>> +}
> >>>> +
> >>>> +/* PRU-specific address translator used by PRU loader. */
> >>>> +static void *pru_da_to_va(struct rproc *rproc, u64 da, size_t len, bool is_iram)
> >>>> +{
> >>>> +  struct pru_rproc *pru = rproc->priv;
> >>>> +  void *va;
> >>>> +
> >>>> +  if (is_iram)
> >>>> +          va = pru_i_da_to_va(pru, da, len);
> >>>> +  else
> >>>> +          va = pru_d_da_to_va(pru, da, len);
> >>>> +
> >>>> +  return va;
> >>>> +}
> >>>> +
> >>>> +static struct rproc_ops pru_rproc_ops = {
> >>>> +  .start          = pru_rproc_start,
> >>>> +  .stop           = pru_rproc_stop,
> >>>> +  .da_to_va       = pru_rproc_da_to_va,
> >>>> +};
> >>>> +
> >>>> +static int
> >>>> +pru_rproc_load_elf_segments(struct rproc *rproc, const struct firmware *fw)
> >>>> +{
> >>>> +  struct device *dev = &rproc->dev;
> >>>> +  struct elf32_hdr *ehdr;
> >>>> +  struct elf32_phdr *phdr;
> >>>> +  int i, ret = 0;
> >>>> +  const u8 *elf_data = fw->data;
> >>>> +
> >>>> +  ehdr = (struct elf32_hdr *)elf_data;
> >>>> +  phdr = (struct elf32_phdr *)(elf_data + ehdr->e_phoff);
> >>>> +
> >>>> +  /* go through the available ELF segments */
> >>>> +  for (i = 0; i < ehdr->e_phnum; i++, phdr++) {
> >>>> +          u32 da = phdr->p_paddr;
> >>>> +          u32 memsz = phdr->p_memsz;
> >>>> +          u32 filesz = phdr->p_filesz;
> >>>> +          u32 offset = phdr->p_offset;
> >>>> +          bool is_iram;
> >>>> +          void *ptr;
> >>>> +
> >>>> +          if (phdr->p_type != PT_LOAD)
> >>>> +                  continue;
> >>>> +
> >>>> +          dev_dbg(dev, "phdr: type %d da 0x%x memsz 0x%x filesz 0x%x\n",
> >>>> +                  phdr->p_type, da, memsz, filesz);
> >>>> +
> >>>> +          if (filesz > memsz) {
> >>>> +                  dev_err(dev, "bad phdr filesz 0x%x memsz 0x%x\n",
> >>>> +                          filesz, memsz);
> >>>> +                  ret = -EINVAL;
> >>>> +                  break;
> >>>> +          }
> >>>> +
> >>>> +          if (offset + filesz > fw->size) {
> >>>> +                  dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n",
> >>>> +                          offset + filesz, fw->size);
> >>>> +                  ret = -EINVAL;
> >>>> +                  break;
> >>>> +          }
> >>>> +
> >>>> +          /* grab the kernel address for this device address */
> >>>> +          is_iram = phdr->p_flags & PF_X;
> >>>> +          ptr = pru_da_to_va(rproc, da, memsz, is_iram);
> >>>> +          if (!ptr) {
> >>>> +                  dev_err(dev, "bad phdr da 0x%x mem 0x%x\n", da, memsz);
> >>>> +                  ret = -EINVAL;
> >>>> +                  break;
> >>>> +          }
> >>>> +
> >>>> +          /* skip the memzero logic performed by remoteproc ELF loader */
> >>>> +          if (!phdr->p_filesz)
> >>>> +                  continue;
> >>>
> >>> I don't see the need to do all this if phdr->p_filesz is not valid.  I would move
> >>> this below the check for PT_LOAD above.  Otherwise people are looking for some
> >>> kind of hidden logic when there isn't any.  The comment should probably go
> >>> after the memcpy().
> >>
>
> Agreed.
>
> Greg, perhaps you can use the variable filesz directly when you move it up for v3.

Agree with both: I will compress it to:
         if (phdr->p_type != PT_LOAD || !filesz)
                  continue;

>
> >> ... and thinking futher on this, it would be nice to know why the memory isn't
> >> zero'ed out when a discrepency exists between the segment size in memory and the
> >> segment size in the image.  Right now all we know is that it isn't done.
>
> The memset is always kinda of an optimization, it is strictly not needed by
> loader code. Also, for PRUs, IIRC, especially on K3 SoCs, we would have to use a
> custom memset to overcome the same limitations as with memcpy, so we dropped it.
>

Mathieu: I hope you are ok with that. If so I will move the mentioned
comment below memcpy as you suggested.

>
> >>
> >
> > With the above:
> >
> > Reviewed-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>

Thank you,
Grzegorz


> >
> >>>
> >>> I am running out of time for today and will continue tomorrow.
> >>>
> >>>> +
> >>>> +          memcpy(ptr, elf_data + phdr->p_offset, filesz);
> >>>> +  }
> >>>> +
> >>>> +  return ret;
> >>>> +}
> >>>> +
> >>>> +/*
> >>>> + * Use a custom parse_fw callback function for dealing with PRU firmware
> >>>> + * specific sections.
> >>>> + */
> >>>> +static int pru_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
> >>>> +{
> >>>> +  int ret;
> >>>> +
> >>>> +  /* load optional rsc table */
> >>>> +  ret = rproc_elf_load_rsc_table(rproc, fw);
> >>>> +  if (ret == -EINVAL)
> >>>> +          dev_dbg(&rproc->dev, "no resource table found for this fw\n");
> >>>> +  else if (ret)
> >>>> +          return ret;
> >>>> +
> >>>> +  return 0;
> >>>> +}
> >>>> +
> >>>> +/*
> >>>> + * Compute PRU id based on the IRAM addresses. The PRU IRAMs are
> >>>> + * always at a particular offset within the PRUSS address space.
> >>>> + */
> >>>> +static int pru_rproc_set_id(struct pru_rproc *pru)
> >>>> +{
> >>>> +  int ret = 0;
> >>>> +
> >>>> +  switch (pru->mem_regions[PRU_IOMEM_IRAM].pa & PRU_IRAM_ADDR_MASK) {
> >>>> +  case PRU0_IRAM_ADDR_MASK:
> >>>> +          pru->id = 0;
> >>>> +          break;
> >>>> +  case PRU1_IRAM_ADDR_MASK:
> >>>> +          pru->id = 1;
> >>>> +          break;
> >>>> +  default:
> >>>> +          ret = -EINVAL;
> >>>> +  }
> >>>> +
> >>>> +  return ret;
> >>>> +}
> >>>> +
> >>>> +static int pru_rproc_probe(struct platform_device *pdev)
> >>>> +{
> >>>> +  struct device *dev = &pdev->dev;
> >>>> +  struct device_node *np = dev->of_node;
> >>>> +  struct platform_device *ppdev = to_platform_device(dev->parent);
> >>>> +  struct pru_rproc *pru;
> >>>> +  const char *fw_name;
> >>>> +  struct rproc *rproc = NULL;
> >>>> +  struct resource *res;
> >>>> +  int i, ret;
> >>>> +  const char *mem_names[PRU_IOMEM_MAX] = { "iram", "control", "debug" };
> >>>> +
> >>>> +  ret = of_property_read_string(np, "firmware-name", &fw_name);
> >>>> +  if (ret) {
> >>>> +          dev_err(dev, "unable to retrieve firmware-name %d\n", ret);
> >>>> +          return ret;
> >>>> +  }
> >>>> +
> >>>> +  rproc = devm_rproc_alloc(dev, pdev->name, &pru_rproc_ops, fw_name,
> >>>> +                           sizeof(*pru));
> >>>> +  if (!rproc) {
> >>>> +          dev_err(dev, "rproc_alloc failed\n");
> >>>> +          return -ENOMEM;
> >>>> +  }
> >>>> +  /* use a custom load function to deal with PRU-specific quirks */
> >>>> +  rproc->ops->load = pru_rproc_load_elf_segments;
> >>>> +
> >>>> +  /* use a custom parse function to deal with PRU-specific resources */
> >>>> +  rproc->ops->parse_fw = pru_rproc_parse_fw;
> >>>> +
> >>>> +  /* error recovery is not supported for PRUs */
> >>>> +  rproc->recovery_disabled = true;
> >>>> +
> >>>> +  /*
> >>>> +   * rproc_add will auto-boot the processor normally, but this is not
> >>>> +   * desired with PRU client driven boot-flow methodology. A PRU
> >>>> +   * application/client driver will boot the corresponding PRU
> >>>> +   * remote-processor as part of its state machine either through the
> >>>> +   * remoteproc sysfs interface or through the equivalent kernel API.
> >>>> +   */
> >>>> +  rproc->auto_boot = false;
> >>>> +
> >>>> +  pru = rproc->priv;
> >>>> +  pru->dev = dev;
> >>>> +  pru->pruss = platform_get_drvdata(ppdev);
> >>>> +  pru->rproc = rproc;
> >>>> +  pru->fw_name = fw_name;
> >>>> +
> >>>> +  for (i = 0; i < ARRAY_SIZE(mem_names); i++) {
> >>>> +          res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> >>>> +                                             mem_names[i]);
> >>>> +          pru->mem_regions[i].va = devm_ioremap_resource(dev, res);
> >>>> +          if (IS_ERR(pru->mem_regions[i].va)) {
> >>>> +                  dev_err(dev, "failed to parse and map memory resource %d %s\n",
> >>>> +                          i, mem_names[i]);
> >>>> +                  ret = PTR_ERR(pru->mem_regions[i].va);
> >>>> +                  return ret;
> >>>> +          }
> >>>> +          pru->mem_regions[i].pa = res->start;
> >>>> +          pru->mem_regions[i].size = resource_size(res);
> >>>> +
> >>>> +          dev_dbg(dev, "memory %8s: pa %pa size 0x%zx va %pK\n",
> >>>> +                  mem_names[i], &pru->mem_regions[i].pa,
> >>>> +                  pru->mem_regions[i].size, pru->mem_regions[i].va);
> >>>> +  }
> >>>> +
> >>>> +  ret = pru_rproc_set_id(pru);
> >>>> +  if (ret < 0)
> >>>> +          return ret;
> >>>> +
> >>>> +  platform_set_drvdata(pdev, rproc);
> >>>> +
> >>>> +  ret = devm_rproc_add(dev, pru->rproc);
> >>>> +  if (ret) {
> >>>> +          dev_err(dev, "rproc_add failed: %d\n", ret);
> >>>> +          return ret;
> >>>> +  }
> >>>> +
> >>>> +  dev_dbg(dev, "PRU rproc node %pOF probed successfully\n", np);
> >>>> +
> >>>> +  return 0;
> >>>> +}
> >>>> +
> >>>> +static int pru_rproc_remove(struct platform_device *pdev)
> >>>> +{
> >>>> +  struct device *dev = &pdev->dev;
> >>>> +  struct rproc *rproc = platform_get_drvdata(pdev);
> >>>> +
> >>>> +  dev_dbg(dev, "%s: removing rproc %s\n", __func__, rproc->name);
> >>>> +
> >>>> +  return 0;
> >>>> +}
> >>>> +
> >>>> +static const struct of_device_id pru_rproc_match[] = {
> >>>> +  { .compatible = "ti,am3356-pru", },
> >>>> +  { .compatible = "ti,am4376-pru", },
> >>>> +  { .compatible = "ti,am5728-pru", },
> >>>> +  { .compatible = "ti,k2g-pru",    },
> >>>> +  {},
> >>>> +};
> >>>> +MODULE_DEVICE_TABLE(of, pru_rproc_match);
> >>>> +
> >>>> +static struct platform_driver pru_rproc_driver = {
> >>>> +  .driver = {
> >>>> +          .name   = "pru-rproc",
> >>>> +          .of_match_table = pru_rproc_match,
> >>>> +          .suppress_bind_attrs = true,
> >>>> +  },
> >>>> +  .probe  = pru_rproc_probe,
> >>>> +  .remove = pru_rproc_remove,
> >>>> +};
> >>>> +module_platform_driver(pru_rproc_driver);
> >>>> +
> >>>> +MODULE_AUTHOR("Suman Anna <s-anna@xxxxxx>");
> >>>> +MODULE_AUTHOR("Andrew F. Davis <afd@xxxxxx>");
> >>>> +MODULE_AUTHOR("Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>");
> >>>> +MODULE_DESCRIPTION("PRU-ICSS Remote Processor Driver");
> >>>> +MODULE_LICENSE("GPL v2");
> >>>> --
> >>>> 2.29.0
> >>>>
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux