On 03-12-20, 17:49, Bjorn Andersson wrote:
> > +#PIN CONFIGURATION NODES
> > +patternProperties:
> > + '-pins$':
> > + type: object
> > + description:
> > + Pinctrl node's client devices use subnodes for desired pin configuration.
> > + Client device subnodes use below standard properties.
> > + $ref: "/schemas/pinctrl/pincfg-node.yaml"
> > +
> > + properties:
> > + pins:
> > + description:
> > + List of gpio pins affected by the properties specified in this subnode.
> > + items:
> > + oneOf:
> > + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$"
>
> That doesn't cover the entire pin space, I think should be:
>
> "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$"
I thought I had fixed this up, will update
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + tlmm: pinctrl@f000000 {
> > + compatible = "qcom,sm8350-pinctrl";
> > + reg = <0x0f100000 0x300000>;
> > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + gpio-ranges = <&tlmm 0 0 203>;
> > + serial-pins {
> > + pins = "gpio18", "gpio19";
> > + function = "qup3";
> > + drive-strength = <8>;
> > + bias-disable;
> > + };
>
> Indentation is slightly off here.
Oops, thanks for pointing out
--
~Vinod
