[PATCH v3 11/13] dt-bindings: tegra: Update csi data-lanes to maximum 8 lanes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tegra VI/CSI hardware don't have native 8 lane CSI RX port.

But x8 capture can be supported by using consecutive x4 ports
simultaneously with HDMI-to-CSI bridges where source image is split
on to two x4 ports.

This patch updates dt-bindings for csi endpoint data-lane property
with maximum of 8 lanes.

Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
---
 .../devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt       | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index 34d9933..8a6d3e1 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -111,8 +111,8 @@ of the following host1x client modules:
 
 	  endpoint (required node)
 	  Required properties:
-	  - data-lanes: an array of data lane from 1 to 4. Valid array
-	    lengths are 1/2/4.
+	  - data-lanes: an array of data lane from 1 to 8. Valid array
+	    lengths are 1/2/4/8.
 	  - remote-endpoint: phandle to sensor 'endpoint' node.
 
         port@1 (required node)
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux