The devices have an optional interrupt line.
Signed-off-by: Christian Eggers <ceggers@xxxxxxx>
---
.../devicetree/bindings/net/dsa/microchip,ksz.yaml | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
index 9f7d131bbcef..c3235110156a 100644
--- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -35,6 +35,11 @@ properties:
Should be a gpio specifier for a reset line.
maxItems: 1
+ interrupts:
+ description:
+ Interrupt specifier for the INTRP_N line from the device.
+ maxItems: 1
+
microchip,synclko-125:
$ref: /schemas/types.yaml#/definitions/flag
description:
@@ -49,6 +54,7 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
// Ethernet switch connected via SPI to the host, CPU port wired to eth0:
eth0 {
@@ -70,6 +76,7 @@ examples:
compatible = "microchip,ksz9477";
reg = <0>;
reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ interrupts-extended = <&gpio5 1 IRQ_TYPE_LEVEL_LOW>; /* INTRP_N line */
spi-max-frequency = <44000000>;
--
Christian Eggers
Embedded software developer
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
