Re: [RFC 1/2] dt-bindings: thermal: sprd: Add virtual thermal documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 27 Nov 2020 16:35:12 +0800, gao.yunxiao6@xxxxxxxxx wrote:
> From: "jeson.gao" <jeson.gao@xxxxxxxxxx>
> 
> virtual thermal node definition description in dts file
> 
> Signed-off-by: jeson.gao <jeson.gao@xxxxxxxxxx>
> ---
>  .../thermal/sprd-virtual-thermal.yaml         | 38 +++++++++++++++++++
>  1 file changed, 38 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/sprd-virtual-thermal.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/thermal/sprd-virtual-thermal.example.dts:21.11-21: Warning (reg_format): /example-0/virtual-sensor@1:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/thermal/sprd-virtual-thermal.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/thermal/sprd-virtual-thermal.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/thermal/sprd-virtual-thermal.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/thermal/sprd-virtual-thermal.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/thermal/sprd-virtual-thermal.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/sprd-virtual-thermal.example.dt.yaml: example-0: virtual-sensor@1:reg:0: [1] is too short
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml


See https://patchwork.ozlabs.org/patch/1407041

The base for the patch is generally the last rc1. Any dependencies
should be noted.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux