Add gpio-line-names as documented in the Banana Pi wiki [1] and in the schematics [2]. [1]: http://wiki.banana-pi.org/Banana_Pi_BPI-M2_ZERO#GPIO_PIN_define [2]: https://drive.google.com/file/d/0B4PAo2nW2KfnMW5sVkxWSW9qa28/view Signed-off-by: Michael Klein <michael@xxxxxxxxxxxx> --- .../dts/sun8i-h2-plus-bananapi-m2-zero.dts | 64 +++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index 4c6704e4c57e..e76d56a3df9c 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -136,6 +136,70 @@ bluetooth { }; +&pio { + gpio-line-names = + /* PA */ + "CON2-P13", "CON2-P11", "CON2-P22", "CON2-P15", + "CON3-P03", "CON3-P02", "CON2-P07", "CON2-P29", + "CON2-P31", "CON2-P33", "CON2-P35", "CON2-P05", + "CON2-P03", "CON2-P08", "CON2-P10", "CON2-P16", + "CON2-P12", "CON2-P37", "CON2-P28", "CON2-P27", + "CON2-P40", "CON2-P38", "", "", + "", "", "", "", "", "", "", "", + + /* PB */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + + /* PC */ + "CON2-P19", "CON2-P21", "CON2-P23", "CON2-P24", + "CON2-P18", "", "", "CON2-P26", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + + /* PD */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "CSI-PWR-EN", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + + /* PE */ + "CN3-P17", "CN3-P13", "CN3-P09", "CN3-P07", + "CN3-P19", "CN3-P21", "CN3-P22", "CN3-P20", + "CN3-P18", "CN3-P16", "CN3-P14", "CN3-P12", + "CN3-P05", "CN3-P03", "CN3-P06", "CN3-P08", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + + /* PF */ + "SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3", + "SDC0-D2", "SDC0-DET", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + + /* PG */ + "WL-SDIO-CLK", "WL-SDIO-CMD", "WL-SDIO-D0", "WL-SDIO-D1", + "WL-SDIO-D2", "WL-SDIO-D3", "BT-UART-TX", "BT-UART-RX", + "BT-UART-RTS", "BT-UART-CTS", "WL-WAKE-AP", "BT-WAKE-AP", + "BT-RST-N", "AP-WAKE-BT", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&r_pio { + gpio-line-names = + /* PL */ + "", "CPUX-SET", "CON2-P32", "POWER-KEY", "CON2-P36", + "VCC-IO-EN", "USB0-ID", "WL-PWR-EN", + "PWR-STB", "PWR-DRAM", "PWR-LED", "IR-RX", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + &usb_otg { dr_mode = "otg"; status = "okay"; -- 2.29.2
