Hi,
On Mon, Nov 23, 2020 at 12:42:54PM +0800, Chen-Yu Tsai wrote:
> On Mon, Oct 26, 2020 at 12:34 AM Andrew Lunn <andrew@xxxxxxx> wrote:
> >
> > On Sun, Oct 25, 2020 at 02:01:44PM +0000, Adam Sampson wrote:
> > > The RX/TX delays for the Ethernet PHY on the Linksprite pcDuino 3 Nano
> > > are configured in hardware, using resistors that are populated to pull
> > > the RTL8211E's RXDLY/TXDLY pins low or high as needed.
> > >
> > > phy-mode should be set to rgmii-id to reflect this. Previously it was
> > > set to rgmii, which used to work but now results in the delays being
> > > disabled again as a result of the bugfix in commit bbc4d71d6354 ("net:
> > > phy: realtek: fix rtl8211e rx/tx delay config").
> > >
> > > Tested on two pcDuino 3 Nano boards purchased in 2015. Without this fix,
> > > Ethernet works unreliably on one board and doesn't work at all on the
> > > other.
> > >
> > > Fixes: 061035d456c9 ("ARM: dts: sun7i: Add dts file for pcDuino 3 Nano board")
> > > Signed-off-by: Adam Sampson <ats@xxxxxxxxx>
> >
> > Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
>
> Looks like none of the maintainers were listed in the recipients.
>
> Acked-by: Chen-Yu Tsai <wens@xxxxxxxx>
Adam, can you resend that patch?
Maxime
Attachment:
signature.asc
Description: PGP signature
