[PATCH 2/2] media: Add imx334 camera sensor driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Martina Krasteva <martinax.krasteva@xxxxxxxxx>

Add a v4l2 sub-device driver for the Sony imx334 image sensor.
This is a camera sensor using the i2c bus for control and the
csi-2 bus for data.

The following features are supported:
- manual exposure and analog gain control support
- vblank/hblank/pixel rate control support
- supported resolution:
    - 3840x2160 @ 60fps
- supported bayer order output:
    - SRGGB12

Signed-off-by: Martina Krasteva <martinax.krasteva@xxxxxxxxx>
Reviewed-by: Gjorgji Rosikopulos <gjorgjix.rosikopulos@xxxxxxxxx>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@xxxxxxxxx>
---
 MAINTAINERS                |    1 +
 drivers/media/i2c/Kconfig  |   14 +
 drivers/media/i2c/Makefile |    1 +
 drivers/media/i2c/imx334.c | 1089 ++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 1105 insertions(+)
 create mode 100644 drivers/media/i2c/imx334.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 6cfce99be4bb..24438c53861b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16326,6 +16326,7 @@ L:	linux-media@xxxxxxxxxxxxxxx
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
+F:	drivers/media/i2c/imx334.c
 
 SONY IMX355 SENSOR DRIVER
 M:	Tianshu Qiu <tian.shu.qiu@xxxxxxxxx>
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 878f66ef2719..f67b7e05b796 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -813,6 +813,20 @@ config VIDEO_IMX319
 	  To compile this driver as a module, choose M here: the
 	  module will be called imx319.
 
+config VIDEO_IMX334
+	tristate "Sony IMX334 sensor support"
+	depends on OF_GPIO
+	depends on I2C && VIDEO_V4L2
+	select VIDEO_V4L2_SUBDEV_API
+	select MEDIA_CONTROLLER
+	select V4L2_FWNODE
+	help
+	  This is a Video4Linux2 sensor driver for the Sony
+	  IMX334 camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called imx334.
+
 config VIDEO_IMX355
 	tristate "Sony IMX355 sensor support"
 	depends on I2C && VIDEO_V4L2
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index f0a77473979d..aeaeaab3783c 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -118,6 +118,7 @@ obj-$(CONFIG_VIDEO_IMX258)	+= imx258.o
 obj-$(CONFIG_VIDEO_IMX274)	+= imx274.o
 obj-$(CONFIG_VIDEO_IMX290)	+= imx290.o
 obj-$(CONFIG_VIDEO_IMX319)	+= imx319.o
+obj-$(CONFIG_VIDEO_IMX334)	+= imx334.o
 obj-$(CONFIG_VIDEO_IMX355)	+= imx355.o
 obj-$(CONFIG_VIDEO_MAX9286)	+= max9286.o
 rdacm20-camera_module-objs	:= rdacm20.o max9271.o
diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c
new file mode 100644
index 000000000000..8fd2c1c934fd
--- /dev/null
+++ b/drivers/media/i2c/imx334.c
@@ -0,0 +1,1089 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Sony imx334 sensor driver
+ *
+ * Copyright (C) 2019-2020 Intel Corporation
+ */
+#include <asm/unaligned.h>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+
+#define IMX334_DRV_NAME		"imx334"
+
+/* Streaming Mode */
+#define IMX334_REG_MODE_SELECT	0x3000
+#define IMX334_MODE_STANDBY	0x01
+#define IMX334_MODE_STREAMING	0x00
+
+/* Lines per frame */
+#define IMX334_REG_LPFR		0x3030
+
+#define IMX334_LPFR_MIN		0x08ca
+#define IMX334_LPFR_MAX		0x20f58
+
+/* Chip ID */
+#define IMX334_REG_ID		0x3044
+#define IMX334_ID		0x1e00
+
+/* Exposure control */
+#define IMX334_REG_SHUTTER	0x3058
+#define IMX334_EXPOSURE_MIN	1
+#define IMX334_EXPOSURE_OFFSET	5
+#define IMX334_EXPOSURE_STEP	1
+#define IMX334_EXPOSURE_DEFAULT	0x0648
+
+/* Analog gain control */
+#define IMX334_REG_AGAIN	0x30e8
+#define IMX334_AGAIN_MIN	0
+#define IMX334_AGAIN_MAX	240
+#define IMX334_AGAIN_STEP	1
+#define IMX334_AGAIN_DEFAULT	0
+
+/* Group hold register */
+#define IMX334_REG_HOLD		0x3001
+
+/* Input clock rate */
+#define IMX334_INCLK_RATE	24000000
+
+#define IMX334_REG_MIN		0x00
+#define IMX334_REG_MAX		0xfffff
+
+/**
+ * struct imx334_reg - imx334 sensor register
+ * @address: Register address
+ * @val: Register value
+ */
+struct imx334_reg {
+	u16 address;
+	u8 val;
+};
+
+/**
+ * struct imx334_reg_list - imx334 sensor register list
+ * @num_of_regs: Number of registers in the list
+ * @regs: Pointer to register list
+ */
+struct imx334_reg_list {
+	u32 num_of_regs;
+	const struct imx334_reg *regs;
+};
+
+/**
+ * struct imx334_mode - imx334 sensor mode structure
+ * @width: Frame width
+ * @height: Frame height
+ * @code: Format code
+ * @ppln: Pixels per line
+ * @lpfr: Lines per frame
+ * @pclk: Sensor pixel clock
+ * @reg_list: Register list for sensor mode
+ */
+struct imx334_mode {
+	u32 width;
+	u32 height;
+	u32 code;
+	u32 ppln;
+	u32 lpfr;
+	u64 pclk;
+	struct imx334_reg_list reg_list;
+};
+
+/**
+ * struct imx334 - imx334 sensor device structure
+ * @dev: Pointer to generic device
+ * @client: Pointer to i2c client
+ * @sd: V4L2 sub-device
+ * @pad: Media pad. Only one pad supported
+ * @reset_gpio: Sensor reset gpio
+ * @inclk: Sensor input clock
+ * @ctrl_handler: V4L2 control handler
+ * @pclk_ctrl: Pointer to pixel clock control
+ * @hblank_ctrl: Pointer to horizontal blanking control
+ * @vblank_ctrl: Pointer to vertical blanking control
+ * @exp_ctrl: Pointer to exposure control
+ * @again_ctrl: Pointer to analog gain control
+ * @exp1_ctrl: Pointer to short exposure control
+ * @again1_ctrl: Pointer to short analog gain control
+ * @exp2_ctrl: Pointer to very short exposure control
+ * @again2_ctrl: Pointer to very short analog gain control
+ * @lpfr: Lines per frame for long exposure frame
+ * @cur_mode: Pointer to current selected sensor mode
+ * @mutex: Mutex for serializing sensor controls
+ * @streaming: Flag indicating streaming state
+ */
+struct imx334 {
+	struct device *dev;
+	struct i2c_client *client;
+	struct v4l2_subdev sd;
+	struct media_pad pad;
+	struct gpio_desc *reset_gpio;
+	struct clk *inclk;
+	struct v4l2_ctrl_handler ctrl_handler;
+	struct v4l2_ctrl *pclk_ctrl;
+	struct v4l2_ctrl *hblank_ctrl;
+	struct v4l2_ctrl *vblank_ctrl;
+	struct {
+		struct v4l2_ctrl *exp_ctrl;
+		struct v4l2_ctrl *again_ctrl;
+	};
+	u32 lpfr;
+	const struct imx334_mode *cur_mode;
+	struct mutex mutex;
+	bool streaming;
+};
+
+/* Sensor mode registers */
+static const struct imx334_reg mode_3840x2160_regs[] = {
+	{0x3000, 0x01},
+	{0x3002, 0x00},
+	{0x3018, 0x04},
+	{0x37b0, 0x36},
+	{0x304c, 0x00},
+	{0x300c, 0x3b},
+	{0x300d, 0x2a},
+	{0x3034, 0x26},
+	{0x3035, 0x02},
+	{0x314c, 0x29},
+	{0x314d, 0x01},
+	{0x315a, 0x02},
+	{0x3168, 0xa0},
+	{0x316a, 0x7e},
+	{0x3288, 0x21},
+	{0x328a, 0x02},
+	{0x302c, 0x3c},
+	{0x302e, 0x00},
+	{0x302f, 0x0f},
+	{0x3076, 0x70},
+	{0x3077, 0x08},
+	{0x3090, 0x70},
+	{0x3091, 0x08},
+	{0x30d8, 0x20},
+	{0x30d9, 0x12},
+	{0x3308, 0x70},
+	{0x3309, 0x08},
+	{0x3414, 0x05},
+	{0x3416, 0x18},
+	{0x35ac, 0x0e},
+	{0x3648, 0x01},
+	{0x364a, 0x04},
+	{0x364c, 0x04},
+	{0x3678, 0x01},
+	{0x367c, 0x31},
+	{0x367e, 0x31},
+	{0x3708, 0x02},
+	{0x3714, 0x01},
+	{0x3715, 0x02},
+	{0x3716, 0x02},
+	{0x3717, 0x02},
+	{0x371c, 0x3d},
+	{0x371d, 0x3f},
+	{0x372c, 0x00},
+	{0x372d, 0x00},
+	{0x372e, 0x46},
+	{0x372f, 0x00},
+	{0x3730, 0x89},
+	{0x3731, 0x00},
+	{0x3732, 0x08},
+	{0x3733, 0x01},
+	{0x3734, 0xfe},
+	{0x3735, 0x05},
+	{0x375d, 0x00},
+	{0x375e, 0x00},
+	{0x375f, 0x61},
+	{0x3760, 0x06},
+	{0x3768, 0x1b},
+	{0x3769, 0x1b},
+	{0x376a, 0x1a},
+	{0x376b, 0x19},
+	{0x376c, 0x18},
+	{0x376d, 0x14},
+	{0x376e, 0x0f},
+	{0x3776, 0x00},
+	{0x3777, 0x00},
+	{0x3778, 0x46},
+	{0x3779, 0x00},
+	{0x377a, 0x08},
+	{0x377b, 0x01},
+	{0x377c, 0x45},
+	{0x377d, 0x01},
+	{0x377e, 0x23},
+	{0x377f, 0x02},
+	{0x3780, 0xd9},
+	{0x3781, 0x03},
+	{0x3782, 0xf5},
+	{0x3783, 0x06},
+	{0x3784, 0xa5},
+	{0x3788, 0x0f},
+	{0x378a, 0xd9},
+	{0x378b, 0x03},
+	{0x378c, 0xeb},
+	{0x378d, 0x05},
+	{0x378e, 0x87},
+	{0x378f, 0x06},
+	{0x3790, 0xf5},
+	{0x3792, 0x43},
+	{0x3794, 0x7a},
+	{0x3796, 0xa1},
+	{0x3e04, 0x0e},
+	{0x3a00, 0x01},
+};
+
+/* Supported sensor mode configurations */
+static const struct imx334_mode supported_mode = {
+	.width = 3840,
+	.height = 2160,
+	.ppln = 4400,
+	.lpfr = 4500,
+	.pclk = 594000000,
+	.code = MEDIA_BUS_FMT_SRGGB12_1X12,
+	.reg_list = {
+		.num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
+		.regs = mode_3840x2160_regs,
+	},
+};
+
+/**
+ * to_imx334() - imv334 V4L2 sub-device to imx334 device.
+ * @subdev: pointer to imx334 V4L2 sub-device
+ *
+ * Return: Pointer to imx334 device
+ */
+static inline struct imx334 *to_imx334(struct v4l2_subdev *subdev)
+{
+	return container_of(subdev, struct imx334, sd);
+}
+
+/**
+ * imx334_read_reg() - Read registers.
+ * @imx334: pointer to imx334 device
+ * @reg: Register address
+ * @len: Length of bytes to read. Max supported bytes is 4
+ * @val: Pointer to register value to be filled.
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_read_reg(struct imx334 *imx334, u16 reg, u32 len, u32 *val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&imx334->sd);
+	u8 addr_buf[2] = { reg >> 8, reg & 0xff };
+	struct i2c_msg msgs[2] = { 0 };
+	u8 data_buf[4] = { 0 };
+	int ret;
+
+	if (WARN_ON(len > 4))
+		return -EINVAL;
+
+	/* Write register address */
+	msgs[0].addr = client->addr;
+	msgs[0].flags = 0;
+	msgs[0].len = ARRAY_SIZE(addr_buf);
+	msgs[0].buf = addr_buf;
+
+	/* Read data from register */
+	msgs[1].addr = client->addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = len;
+	msgs[1].buf = &data_buf[4 - len];
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret != ARRAY_SIZE(msgs))
+		return -EIO;
+
+	*val = get_unaligned_be32(data_buf);
+
+	return 0;
+}
+
+/**
+ * imx334_write_reg() - Write register
+ * @imx334: pointer to imx334 device
+ * @reg: Register address
+ * @len: Length of bytes. Max supported bytes is 4
+ * @val: Register value
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_write_reg(struct imx334 *imx334, u16 reg, u32 len, u32 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&imx334->sd);
+	u8 buf[3] = {0};
+	int ret;
+	int i;
+
+	if (WARN_ON(len > 4))
+		return -EINVAL;
+
+	/* Currently we can write to sensor only one byte at a time */
+	for (i = 0; i < len; i++) {
+		put_unaligned_be16(reg + i, buf);
+		buf[2] = (val >> (8 * i)) & 0xff;
+		ret = i2c_master_send(client, buf, ARRAY_SIZE(buf));
+		if (ret != ARRAY_SIZE(buf)) {
+			dev_err_ratelimited(imx334->dev,
+					    "write reg 0x%4.4x return err %d",
+					    reg, ret);
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * imx334_write_regs() - Write a list of registers
+ * @imx334: pointer to imx334 device
+ * @regs: List of registers to be written
+ * @len: Length of registers array
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_write_regs(struct imx334 *imx334,
+			     const struct imx334_reg *regs, u32 len)
+{
+	int ret;
+	unsigned int i;
+
+	for (i = 0; i < len; i++) {
+		ret = imx334_write_reg(imx334, regs[i].address, 1, regs[i].val);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * imx334_update_controls() - Update control ranges based on streaming mode
+ * @imx334: pointer to imx334 device
+ * @mode: pointer to imx334_mode sensor mode
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_update_controls(struct imx334 *imx334,
+				  const struct imx334_mode *mode)
+{
+	int ret;
+
+	ret = __v4l2_ctrl_s_ctrl(imx334->vblank_ctrl,
+				 imx334->lpfr - mode->height);
+	if (ret)
+		return ret;
+
+	ret = __v4l2_ctrl_s_ctrl(imx334->hblank_ctrl, mode->ppln - mode->width);
+	if (ret)
+		return ret;
+
+	ret = __v4l2_ctrl_modify_range(imx334->pclk_ctrl, mode->pclk,
+				       mode->pclk, 1, mode->pclk);
+	if (ret)
+		return ret;
+
+	ret = __v4l2_ctrl_modify_range(imx334->exp_ctrl, IMX334_EXPOSURE_MIN,
+				       imx334->lpfr - IMX334_EXPOSURE_OFFSET,
+				       1, IMX334_EXPOSURE_DEFAULT);
+
+	return ret;
+}
+
+/**
+ * imx334_update_exp_gain() - Set updated exposure and gain
+ * @imx334: pointer to imx334 device
+ * @exposure: updated exposure value
+ * @gain: updated analog gain value
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_update_exp_gain(struct imx334 *imx334, u32 exposure, u32 gain)
+{
+	u32 shutter = 0;
+	int ret;
+
+	shutter = imx334->lpfr - exposure;
+
+	dev_dbg(imx334->dev, "Set long exp %u analog gain %u sh0 %u lpfr %u",
+		exposure, gain, shutter, imx334->lpfr);
+
+	ret = imx334_write_reg(imx334, IMX334_REG_HOLD, 1, 1);
+	if (ret)
+		return ret;
+
+	ret = imx334_write_reg(imx334, IMX334_REG_LPFR, 3, imx334->lpfr);
+	if (ret)
+		goto error_release_group_hold;
+
+	ret = imx334_write_reg(imx334, IMX334_REG_SHUTTER, 3, shutter);
+	if (ret)
+		goto error_release_group_hold;
+
+	ret = imx334_write_reg(imx334, IMX334_REG_AGAIN, 1, gain);
+	if (ret)
+		goto error_release_group_hold;
+
+	imx334_write_reg(imx334, IMX334_REG_HOLD, 1, 0);
+
+	return 0;
+
+error_release_group_hold:
+	imx334_write_reg(imx334, IMX334_REG_HOLD, 1, 0);
+	return ret;
+}
+
+/**
+ * imx334_set_ctrl() - Set subdevice control
+ * @ctrl: pointer to v4l2_ctrl structure
+ *
+ * Supported controls:
+ * - V4L2_CID_VBLANK
+ * - cluster controls:
+ *   - V4L2_CID_ANALOGUE_GAIN
+ *   - V4L2_CID_EXPOSURE
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct imx334 *imx334 =
+		container_of(ctrl->handler, struct imx334, ctrl_handler);
+	u32 analog_gain;
+	u32 exposure;
+	int ret;
+
+	/* Set controls only if sensor is in power on state */
+	if (!pm_runtime_get_if_in_use(imx334->dev))
+		return 0;
+
+	/* Handle the cluster for both controls */
+	switch (ctrl->id) {
+	case V4L2_CID_VBLANK:
+		imx334->lpfr = imx334->vblank_ctrl->val +
+			imx334->cur_mode->height;
+
+		dev_dbg(imx334->dev, "Received vblank %u new lpfr %u",
+			imx334->vblank_ctrl->val, imx334->lpfr);
+
+		ret = imx334_update_controls(imx334, imx334->cur_mode);
+		break;
+	case V4L2_CID_EXPOSURE:
+		exposure = ctrl->val;
+		analog_gain = imx334->again_ctrl->val;
+
+		dev_dbg(imx334->dev, "Received exp %u analog gain %u",
+			exposure, analog_gain);
+
+		ret = imx334_update_exp_gain(imx334, exposure, analog_gain);
+		break;
+	default:
+		dev_err(imx334->dev, "Invalid control %d", ctrl->id);
+		ret = -EINVAL;
+	}
+
+	pm_runtime_put(imx334->dev);
+
+	return ret;
+}
+
+/* V4l2 subdevice control ops*/
+static const struct v4l2_ctrl_ops imx334_ctrl_ops = {
+	.s_ctrl = imx334_set_ctrl,
+};
+
+/**
+ * imx334_enum_mbus_code() - Enumerate V4L2 sub-device mbus codes
+ * @sd: pointer to imx334 V4L2 sub-device structure
+ * @cfg: V4L2 sub-device pad configuration
+ * @code: V4L2 sub-device code enumeration need to be filled
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_enum_mbus_code(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_pad_config *cfg,
+				 struct v4l2_subdev_mbus_code_enum *code)
+{
+	struct imx334 *imx334 = to_imx334(sd);
+
+	if (code->index > 0)
+		return -EINVAL;
+
+	mutex_lock(&imx334->mutex);
+	code->code = supported_mode.code;
+	mutex_unlock(&imx334->mutex);
+
+	return 0;
+}
+
+/**
+ * imx334_enum_frame_size() - Enumerate V4L2 sub-device frame sizes
+ * @sd: pointer to imx334 V4L2 sub-device structure
+ * @cfg: V4L2 sub-device pad configuration
+ * @fsize: V4L2 sub-device size enumeration need to be filled
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_enum_frame_size(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_pad_config *cfg,
+				  struct v4l2_subdev_frame_size_enum *fsize)
+{
+	struct imx334 *imx334 = to_imx334(sd);
+
+	if (fsize->index > 0)
+		return -EINVAL;
+
+	mutex_lock(&imx334->mutex);
+	if (fsize->code != supported_mode.code) {
+		mutex_unlock(&imx334->mutex);
+		return -EINVAL;
+	}
+
+	fsize->min_width = supported_mode.width;
+	fsize->max_width = fsize->min_width;
+	fsize->min_height = supported_mode.height;
+	fsize->max_height = fsize->min_height;
+	mutex_unlock(&imx334->mutex);
+
+	return 0;
+}
+
+/**
+ * imx334_fill_pad_format() - Fill subdevice pad format
+ *                              from selected sensor mode
+ * @imx334: pointer to imx334 device
+ * @mode: Pointer to imx334_mode sensor mode
+ * @fmt: V4L2 sub-device format need to be filled
+ */
+static void imx334_fill_pad_format(struct imx334 *imx334,
+				   const struct imx334_mode *mode,
+				   struct v4l2_subdev_format *fmt)
+{
+	fmt->format.width = mode->width;
+	fmt->format.height = mode->height;
+	fmt->format.code = mode->code;
+	fmt->format.field = V4L2_FIELD_NONE;
+}
+
+/**
+ * imx334_get_pad_format() - Get subdevice pad format
+ * @sd: pointer to imx334 V4L2 sub-device structure
+ * @cfg: V4L2 sub-device pad configuration
+ * @fmt: V4L2 sub-device format need to be set
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_get_pad_format(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_pad_config *cfg,
+				 struct v4l2_subdev_format *fmt)
+{
+	struct imx334 *imx334 = to_imx334(sd);
+
+	mutex_lock(&imx334->mutex);
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+		struct v4l2_mbus_framefmt *framefmt;
+
+		framefmt = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
+		fmt->format = *framefmt;
+	} else {
+		imx334_fill_pad_format(imx334, imx334->cur_mode, fmt);
+	}
+
+	mutex_unlock(&imx334->mutex);
+
+	return 0;
+}
+
+/**
+ * imx334_set_pad_format() - Set subdevice pad format
+ * @sd: pointer to imx334 V4L2 sub-device structure
+ * @cfg: V4L2 sub-device pad configuration
+ * @fmt: V4L2 sub-device format need to be set
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_set_pad_format(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_pad_config *cfg,
+				 struct v4l2_subdev_format *fmt)
+{
+	struct imx334 *imx334 = to_imx334(sd);
+	const struct imx334_mode *mode;
+	int ret = 0;
+
+	mutex_lock(&imx334->mutex);
+
+	mode = &supported_mode;
+	imx334_fill_pad_format(imx334, mode, fmt);
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+		struct v4l2_mbus_framefmt *framefmt;
+
+		framefmt = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
+		*framefmt = fmt->format;
+	} else {
+		ret = imx334_update_controls(imx334, mode);
+		if (ret)
+			dev_err(imx334->dev, "failed to update ctls");
+
+		imx334->cur_mode = mode;
+	}
+
+	mutex_unlock(&imx334->mutex);
+
+	return ret;
+}
+
+/**
+ * imx334_init_pad_cfg() - Initialize sub-device pad configuration
+ * @sd: pointer to imx334 V4L2 sub-device structure
+ * @cfg: V4L2 sub-device pad configuration
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_init_pad_cfg(struct v4l2_subdev *sd,
+			       struct v4l2_subdev_pad_config *cfg)
+{
+	struct v4l2_subdev_format fmt = { 0 };
+
+	fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+	fmt.format.width = supported_mode.width;
+	fmt.format.height = supported_mode.height;
+	fmt.format.code = supported_mode.code;
+	fmt.format.field = V4L2_FIELD_NONE;
+
+	return imx334_set_pad_format(sd, cfg, &fmt);
+}
+
+/**
+ * imx334_start_streaming() - Start sensor stream
+ * @imx334: pointer to imx334 device
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_start_streaming(struct imx334 *imx334)
+{
+	const struct imx334_reg_list *reg_list;
+	int ret;
+
+	/* Write sensor mode registers */
+	reg_list = &imx334->cur_mode->reg_list;
+	ret = imx334_write_regs(imx334, reg_list->regs,
+				reg_list->num_of_regs);
+	if (ret) {
+		dev_err(imx334->dev, "fail to write initial registers");
+		return ret;
+	}
+
+	/* Setup handler will write actual exposure and gain */
+	ret =  __v4l2_ctrl_handler_setup(imx334->sd.ctrl_handler);
+	if (ret) {
+		dev_err(imx334->dev, "fail to setup handler");
+		return ret;
+	}
+
+	/* Start streaming */
+	ret = imx334_write_reg(imx334, IMX334_REG_MODE_SELECT,
+			       1, IMX334_MODE_STREAMING);
+	if (ret) {
+		dev_err(imx334->dev, "fail to start streaming");
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * imx334_stop_streaming() - Stop sensor stream
+ * @imx334: pointer to imx334 device
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_stop_streaming(struct imx334 *imx334)
+{
+	return imx334_write_reg(imx334, IMX334_REG_MODE_SELECT,
+				1, IMX334_MODE_STANDBY);
+}
+
+/**
+ * imx334_set_stream() - Enable sensor streaming
+ * @sd: pointer to imx334 subdevice
+ * @enable: Set to enable sensor streaming
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_set_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct imx334 *imx334 = to_imx334(sd);
+	int ret;
+
+	mutex_lock(&imx334->mutex);
+
+	if (imx334->streaming == enable) {
+		mutex_unlock(&imx334->mutex);
+		return 0;
+	}
+
+	if (enable) {
+		ret = pm_runtime_get_sync(imx334->dev);
+		if (ret)
+			goto error_power_off;
+
+		ret = imx334_start_streaming(imx334);
+		if (ret)
+			goto error_power_off;
+	} else {
+		imx334_stop_streaming(imx334);
+		pm_runtime_put(imx334->dev);
+	}
+
+	imx334->streaming = enable;
+
+	mutex_unlock(&imx334->mutex);
+
+	return 0;
+
+error_power_off:
+	pm_runtime_put(imx334->dev);
+	mutex_unlock(&imx334->mutex);
+
+	return ret;
+}
+
+/**
+ * imx334_detect() - Detect imx334 sensor
+ * @imx334: pointer to imx334 device
+ *
+ * Return: 0 if successful, -EIO if sensor id does not match
+ */
+static int imx334_detect(struct imx334 *imx334)
+{
+	int ret;
+	u32 val;
+
+	ret = imx334_read_reg(imx334, IMX334_REG_ID, 2, &val);
+	if (ret)
+		return ret;
+
+	if (val != IMX334_ID) {
+		dev_err(imx334->dev, "chip id mismatch: %x!=%x",
+			IMX334_ID, val);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/* V4l2 subdevice ops */
+static const struct v4l2_subdev_video_ops imx334_video_ops = {
+	.s_stream = imx334_set_stream,
+};
+
+static const struct v4l2_subdev_pad_ops imx334_pad_ops = {
+	.init_cfg = imx334_init_pad_cfg,
+	.enum_mbus_code = imx334_enum_mbus_code,
+	.enum_frame_size = imx334_enum_frame_size,
+	.get_fmt = imx334_get_pad_format,
+	.set_fmt = imx334_set_pad_format,
+};
+
+static const struct v4l2_subdev_ops imx334_subdev_ops = {
+	.video = &imx334_video_ops,
+	.pad = &imx334_pad_ops,
+};
+
+static const struct media_entity_operations imx334_subdev_entity_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+/**
+ * imx334_power_on() - Sensor power on sequence
+ * @dev: pointer to i2c device
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_power_on(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct imx334 *imx334 = to_imx334(sd);
+	int ret;
+
+	gpiod_set_value_cansleep(imx334->reset_gpio, 1);
+
+	ret = clk_prepare_enable(imx334->inclk);
+	if (ret) {
+		dev_err(imx334->dev, "fail to enable inclk");
+		goto error_reset;
+	}
+
+	usleep_range(18000, 20000);
+
+	return 0;
+
+error_reset:
+	gpiod_set_value_cansleep(imx334->reset_gpio, 0);
+
+	return ret;
+}
+
+/**
+ * imx334_power_off() - Sensor power off sequence
+ * @dev: pointer to i2c device
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_power_off(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct imx334 *imx334 = to_imx334(sd);
+
+	gpiod_set_value_cansleep(imx334->reset_gpio, 0);
+
+	clk_disable_unprepare(imx334->inclk);
+
+	return 0;
+}
+
+/**
+ * imx334_init_controls() - Initialize sensor subdevice controls
+ * @imx334: pointer to imx334 device
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_init_controls(struct imx334 *imx334)
+{
+	struct v4l2_ctrl_handler *ctrl_hdlr = &imx334->ctrl_handler;
+	const struct imx334_mode *mode = imx334->cur_mode;
+	u32 hblank;
+	u32 vblank;
+	int ret;
+
+	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 5);
+	if (ret)
+		return ret;
+
+	/* Serialize controls with sensor device */
+	ctrl_hdlr->lock = &imx334->mutex;
+
+	/* Initialize exposure and gain */
+	imx334->exp_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
+					     &imx334_ctrl_ops,
+					     V4L2_CID_EXPOSURE,
+					     IMX334_EXPOSURE_MIN,
+					     mode->lpfr,
+					     IMX334_EXPOSURE_STEP,
+					     IMX334_EXPOSURE_DEFAULT);
+
+	imx334->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
+					       &imx334_ctrl_ops,
+					       V4L2_CID_ANALOGUE_GAIN,
+					       IMX334_AGAIN_MIN,
+					       IMX334_AGAIN_MAX,
+					       IMX334_AGAIN_STEP,
+					       IMX334_AGAIN_DEFAULT);
+
+	v4l2_ctrl_cluster(2, &imx334->exp_ctrl);
+
+	vblank = mode->lpfr - mode->height;
+	imx334->vblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
+						&imx334_ctrl_ops,
+						V4L2_CID_VBLANK,
+						IMX334_LPFR_MIN - mode->height,
+						IMX334_LPFR_MAX - mode->height,
+						1, vblank);
+
+	/* Read only controls */
+	imx334->pclk_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
+					      &imx334_ctrl_ops,
+					      V4L2_CID_PIXEL_RATE,
+					      mode->pclk, mode->pclk,
+					      1, mode->pclk);
+	if (imx334->pclk_ctrl)
+		imx334->pclk_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+	hblank = mode->ppln - mode->width;
+	imx334->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
+						&imx334_ctrl_ops,
+						V4L2_CID_HBLANK,
+						IMX334_REG_MIN,
+						IMX334_REG_MAX,
+						1, hblank);
+	if (imx334->hblank_ctrl)
+		imx334->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+	if (ctrl_hdlr->error) {
+		ret = ctrl_hdlr->error;
+		dev_err(imx334->dev, "control init failed: %d", ret);
+		goto error;
+	}
+
+	imx334->sd.ctrl_handler = ctrl_hdlr;
+
+	return 0;
+
+error:
+	v4l2_ctrl_handler_free(ctrl_hdlr);
+
+	return ret;
+}
+
+/**
+ * imx334_probe() - I2C client device binding
+ * @client: pointer to i2c client device
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_probe(struct i2c_client *client)
+{
+	struct imx334 *imx334;
+	unsigned long rate;
+	int ret;
+
+	imx334 = devm_kzalloc(&client->dev, sizeof(*imx334), GFP_KERNEL);
+	if (!imx334)
+		return -ENOMEM;
+
+	mutex_init(&imx334->mutex);
+
+	imx334->dev = &client->dev;
+
+	/* Initialize subdev */
+	v4l2_i2c_subdev_init(&imx334->sd, client, &imx334_subdev_ops);
+
+	/* Request optional reset pin */
+	imx334->reset_gpio = gpiod_get_optional(imx334->dev, "reset",
+						GPIOD_OUT_LOW);
+	if (IS_ERR(imx334->reset_gpio)) {
+		ret = PTR_ERR(imx334->reset_gpio);
+		dev_err(imx334->dev, "failed to get reset gpio %d", ret);
+		goto error_mutex_destroy;
+	}
+
+	/* Get sensor input clock */
+	imx334->inclk = devm_clk_get(imx334->dev, "inclk");
+	if (IS_ERR(imx334->inclk)) {
+		ret = PTR_ERR(imx334->inclk);
+		dev_err(imx334->dev, "could not get inclk");
+		goto error_mutex_destroy;
+	}
+
+	rate = clk_get_rate(imx334->inclk);
+	if (rate != IMX334_INCLK_RATE) {
+		dev_err(imx334->dev, "inclk frequency mismatch");
+		ret = -EINVAL;
+		goto error_mutex_destroy;
+	}
+
+	ret = imx334_power_on(imx334->dev);
+	if (ret) {
+		dev_err(imx334->dev, "failed to power-on the sensor");
+		goto error_mutex_destroy;
+	}
+
+	/* Check module identity */
+	ret = imx334_detect(imx334);
+	if (ret) {
+		dev_err(imx334->dev, "failed to find sensor: %d", ret);
+		goto error_power_off;
+	}
+
+	/* Set default mode to max resolution */
+	imx334->cur_mode = &supported_mode;
+	imx334->lpfr = imx334->cur_mode->lpfr;
+
+	ret = imx334_init_controls(imx334);
+	if (ret) {
+		dev_err(imx334->dev, "failed to init controls: %d", ret);
+		goto error_power_off;
+	}
+
+	/* Initialize subdev */
+	imx334->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	imx334->sd.entity.ops = &imx334_subdev_entity_ops;
+	imx334->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+
+	/* Initialize source pad */
+	imx334->pad.flags = MEDIA_PAD_FL_SOURCE;
+	ret = media_entity_pads_init(&imx334->sd.entity, 1, &imx334->pad);
+	if (ret) {
+		dev_err(imx334->dev, "failed to init entity pads: %d", ret);
+		goto error_handler_free;
+	}
+
+	ret = v4l2_async_register_subdev_sensor_common(&imx334->sd);
+	if (ret < 0) {
+		dev_err(imx334->dev,
+			"failed to register async subdev: %d", ret);
+		goto error_media_entity;
+	}
+
+	pm_runtime_set_active(imx334->dev);
+	pm_runtime_enable(imx334->dev);
+	pm_runtime_idle(imx334->dev);
+
+	return 0;
+
+error_media_entity:
+	media_entity_cleanup(&imx334->sd.entity);
+error_handler_free:
+	v4l2_ctrl_handler_free(imx334->sd.ctrl_handler);
+error_power_off:
+	imx334_power_off(imx334->dev);
+error_mutex_destroy:
+	mutex_destroy(&imx334->mutex);
+
+	return ret;
+}
+
+/**
+ * imx334_remove() - I2C client device unbinding
+ * @client: pointer to I2C client device
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx334_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct imx334 *imx334 = to_imx334(sd);
+
+	v4l2_async_unregister_subdev(sd);
+	media_entity_cleanup(&sd->entity);
+	v4l2_ctrl_handler_free(sd->ctrl_handler);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_suspended(&client->dev);
+
+	mutex_destroy(&imx334->mutex);
+
+	return 0;
+}
+
+static const struct dev_pm_ops imx334_pm_ops = {
+	SET_RUNTIME_PM_OPS(imx334_power_off, imx334_power_on, NULL)
+};
+
+static const struct of_device_id imx334_of_match[] = {
+	{ .compatible = "sony,imx334" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, imx334_of_match);
+
+static struct i2c_driver imx334_driver = {
+	.probe_new = imx334_probe,
+	.remove = imx334_remove,
+	.driver = {
+		.name = IMX334_DRV_NAME,
+		.pm = &imx334_pm_ops,
+		.of_match_table = imx334_of_match,
+	},
+};
+
+module_i2c_driver(imx334_driver);
+
+MODULE_DESCRIPTION("Sony imx334 sensor driver");
+MODULE_LICENSE("GPL");
-- 
2.11.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux