This should be done in the device driver instead of the device tree. Signed-off-by: Christian Eggers <ceggers@xxxxxxx> --- drivers/net/dsa/microchip/ksz8795_spi.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/dsa/microchip/ksz8795_spi.c b/drivers/net/dsa/microchip/ksz8795_spi.c index 8b00f8e6c02f..f98432a3e2b5 100644 --- a/drivers/net/dsa/microchip/ksz8795_spi.c +++ b/drivers/net/dsa/microchip/ksz8795_spi.c @@ -49,6 +49,12 @@ static int ksz8795_spi_probe(struct spi_device *spi) if (spi->dev.platform_data) dev->pdata = spi->dev.platform_data; + /* setup spi */ + spi->mode = SPI_MODE_3; + ret = spi_setup(spi); + if (ret) + return ret; + ret = ksz8795_switch_register(dev); /* Main DSA driver may not be started yet. */ -- Christian Eggers Embedded software developer Arnold & Richter Cine Technik GmbH & Co. Betriebs KG Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918 Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477 Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
