[PATCH v4 1/4] dt-binding: mt8183: Add Mediatek MDP3 dt-bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: daoyuan huang <daoyuan.huang@xxxxxxxxxxxx>

This patch adds DT binding document for Media Data Path 3 (MDP3)
a unit in multimedia system used for scaling and color format convert.

Signed-off-by: Ping-Hsun Wu <ping-hsun.wu@xxxxxxxxxxxx>
Signed-off-by: daoyuan huang <daoyuan.huang@xxxxxxxxxxxx>
---
 .../bindings/media/mediatek,mt8183-mdp3.txt   | 208 ++++++++++++++++++
 1 file changed, 208 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt

diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt b/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt
new file mode 100644
index 000000000000..d4db908b8b53
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8183-mdp3.txt
@@ -0,0 +1,208 @@
+* Mediatek Media Data Path 3
+
+Media Data Path 3 (MDP3) is used for scaling and color space conversion.
+
+Required properties (controller node):
+- compatible: "mediatek,mt8183-mdp3"
+- mediatek,scp: the node of system control processor (SCP), using the
+  remoteproc & rpmsg framework, see
+  Documentation/devicetree/bindings/remoteproc/mtk,scp.txt for details.
+- mediatek,mmsys: the node of mux(multiplexer) controller for HW connections.
+- mediatek,mm-mutex: the node of sof(start of frame) signal controller.
+- mediatek,mailbox-gce: the node of global command engine (GCE), used to
+  read/write registers with critical time limitation, see
+  Documentation/devicetree/bindings/mailbox/mtk-gce.txt for details.
+- mboxes: mailbox number used to communicate with GCE.
+- gce-subsys: sub-system id corresponding to the register address.
+- gce-event-names: in use event name list, used to correspond to event IDs.
+- gce-events: in use event IDs list, all IDs are defined in
+  'dt-bindings/gce/mt8183-gce.h'.
+
+Required properties (all function blocks, child node):
+- compatible: Should be one of
+        "mediatek,mt8183-mdp-rdma"  - read DMA
+        "mediatek,mt8183-mdp-rsz"   - resizer
+        "mediatek,mt8183-mdp-wdma"  - write DMA
+        "mediatek,mt8183-mdp-wrot"  - write DMA with rotation
+        "mediatek,mt8183-mdp-ccorr" - color correction with 3X3 matrix
+- reg: Physical base address and length of the function block register space.
+- clocks: device clocks, see
+  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- power-domains: A phandle to the power domain, see
+  Documentation/devicetree/bindings/power/power_domain.txt for details.
+- mediatek,mdp-id: HW index to distinguish same functionality modules.
+
+Required properties (DMA function blocks, child node):
+- compatible: Should be one of
+        "mediatek,mt8183-mdp-rdma"
+        "mediatek,mt8183-mdp-wdma"
+        "mediatek,mt8183-mdp-wrot"
+- mdp-comps(wdma & wrot only):
+        "mediatek,mt8183-mdp-path"  - MDP output path selection, create a
+                                      component for path connectedness of HW
+                                      pipe control; Align with mdp_comp_of_ids[]
+                                      in mtk-mdp3-comp.c.
+- mdp-comp-ids(wdma & wrot only): Index of the output paths, the number aligns
+  with mdp_comp_matches[] in mtk-mdp3-comp.c.
+- iommus: should point to the respective IOMMU block with master port as
+  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt for
+  details.
+- mediatek,larb: Must contain the local arbiters in the current Socs, see
+  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt for
+  details.
+
+Required properties (input path selection node):
+- compatible:
+        "mediatek,mt8183-mmsys"     - For MDP input/output source selection.
+- mdp-comps:
+        "mediatek,mt8183-mdp-dl"    - MDP direct link input path selection,
+                                      create a component for path connectedness
+                                      of HW pipe control; Align with
+                                      mdp_comp_of_ids[] in mtk-mdp3-comp.c.
+- mdp-comp-ids: Index of the input paths, the number aligns with
+  mdp_comp_matches[] in mtk-mdp3-comp.c.
+- reg: Physical base address and length of the function block register space.
+- clocks: device clocks, see
+  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+
+Required properties (ISP PASS2 (DIP) module path selection node):
+- compatible:
+        "mediatek,mt8183-imgsys"    - For ISP PASS2 (DIP) modules frame sync
+                                      control with MDP.
+- mdp-comps:
+        "mediatek,mt8183-mdp-imgi"  - Input DMA of ISP PASS2 (DIP) module for
+                                      raw image input.
+        "mediatek,mt8183-mdp-exto"  - Output DMA of ISP PASS2 (DIP) module for
+                                      yuv image output.
+- mdp-comp-ids: Index of the modules, the number aligns with mdp_comp_matches[]
+  in mtk-mdp3-comp.c.
+- reg: Physical base address and length of the function block register space.
+- mediatek,mdp-id: HW index to distinguish same functionality modules.
+
+Example:
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt8183-mmsys", "syscon";
+			mdp-comps = "mediatek,mt8183-mdp-dl",
+				    "mediatek,mt8183-mdp-dl";
+			mdp-comp-ids = <0 1>;
+			reg = <0 0x14000000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&mmsys CLK_MM_MDP_DL_TXCK>,
+				 <&mmsys CLK_MM_MDP_DL_RX>,
+				 <&mmsys CLK_MM_IPU_DL_TXCK>,
+				 <&mmsys CLK_MM_IPU_DL_RX>;
+		};
+
+		mdp_rdma0: mdp-rdma0@14001000 {
+			compatible = "mediatek,mt8183-mdp-rdma",
+				     "mediatek,mt8183-mdp3";
+			mediatek,scp = <&scp>;
+			mediatek,mdp-id = <0>;
+			reg = <0 0x14001000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+			power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+				 <&mmsys CLK_MM_MDP_RSZ1>;
+			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
+			mediatek,larb = <&larb0>;
+			mediatek,mmsys = <&mmsys>;
+			mediatek,mm-mutex = <&mutex>;
+			mediatek,imgsys = <&imgsys>;
+			mediatek,mailbox-gce = <&gce>;
+			mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
+				 <&gce 21 CMDQ_THR_PRIO_LOWEST 0>,
+				 <&gce 22 CMDQ_THR_PRIO_LOWEST 0>,
+				 <&gce 23 CMDQ_THR_PRIO_LOWEST 0>;
+			gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>,
+				     <&gce 0x14010000 SUBSYS_1401XXXX>,
+				     <&gce 0x14020000 SUBSYS_1402XXXX>,
+				     <&gce 0x15020000 SUBSYS_1502XXXX>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+					      <CMDQ_EVENT_MDP_RDMA0_EOF>,
+					      <CMDQ_EVENT_MDP_RSZ0_SOF>,
+					      <CMDQ_EVENT_MDP_RSZ1_SOF>,
+					      <CMDQ_EVENT_MDP_TDSHP_SOF>,
+					      <CMDQ_EVENT_MDP_WROT0_SOF>,
+					      <CMDQ_EVENT_MDP_WROT0_EOF>,
+					      <CMDQ_EVENT_MDP_WDMA0_SOF>,
+					      <CMDQ_EVENT_MDP_WDMA0_EOF>,
+					      <CMDQ_EVENT_ISP_FRAME_DONE_P2_0>,
+					      <CMDQ_EVENT_ISP_FRAME_DONE_P2_1>,
+					      <CMDQ_EVENT_ISP_FRAME_DONE_P2_2>,
+					      <CMDQ_EVENT_ISP_FRAME_DONE_P2_3>,
+					      <CMDQ_EVENT_ISP_FRAME_DONE_P2_4>,
+					      <CMDQ_EVENT_ISP_FRAME_DONE_P2_5>,
+					      <CMDQ_EVENT_ISP_FRAME_DONE_P2_6>,
+					      <CMDQ_EVENT_ISP_FRAME_DONE_P2_7>,
+					      <CMDQ_EVENT_ISP_FRAME_DONE_P2_8>,
+					      <CMDQ_EVENT_ISP_FRAME_DONE_P2_9>,
+					      <CMDQ_EVENT_ISP_FRAME_DONE_P2_10>,
+					      <CMDQ_EVENT_ISP_FRAME_DONE_P2_11>,
+					      <CMDQ_EVENT_ISP_FRAME_DONE_P2_12>,
+					      <CMDQ_EVENT_ISP_FRAME_DONE_P2_13>,
+					      <CMDQ_EVENT_ISP_FRAME_DONE_P2_14>,
+					      <CMDQ_EVENT_WPE_A_DONE>,
+					      <CMDQ_EVENT_SPE_B_DONE>;
+		};
+
+		mdp_rsz0: mdp-rsz0@14003000 {
+			compatible = "mediatek,mt8183-mdp-rsz";
+			mediatek,mdp-id = <0>;
+			reg = <0 0x14003000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+		};
+
+		mdp_rsz1: mdp-rsz1@14004000 {
+			compatible = "mediatek,mt8183-mdp-rsz";
+			mediatek,mdp-id = <1>;
+			reg = <0 0x14004000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+		};
+
+		mdp_wrot0: mdp-wrot0@14005000 {
+			compatible = "mediatek,mt8183-mdp-wrot";
+			mediatek,mdp-id = <0>;
+			mdp-comps = "mediatek,mt8183-mdp-path";
+			mdp-comp-ids = <0>;
+			reg = <0 0x14005000 0 0x1000>;
+			power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_WROT0>;
+			iommus = <&iommu M4U_PORT_MDP_WROT0>;
+			mediatek,larb = <&larb0>;
+		};
+
+		mdp_wdma: mdp-wdma@14006000 {
+			compatible = "mediatek,mt8183-mdp-wdma";
+			mediatek,mdp-id = <0>;
+			mdp-comps = "mediatek,mt8183-mdp-path";
+			mdp-comp-ids = <1>;
+			reg = <0 0x14006000 0 0x1000>;
+			power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_WDMA0>;
+			iommus = <&iommu M4U_PORT_MDP_WDMA0>;
+			mediatek,larb = <&larb0>;
+		};
+
+		mdp_ccorr: mdp-ccorr@1401c000 {
+			compatible = "mediatek,mt8183-mdp-ccorr";
+			mediatek,mdp-id = <0>;
+			reg = <0 0x1401c000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_CCORR>;
+		};
+
+		imgsys: syscon@15020000 {
+			compatible = "mediatek,mt8183-imgsys", "syscon";
+			mediatek,mdp-id = <0>;
+			mdp-comps = "mediatek,mt8183-mdp-imgi",
+				    "mediatek,mt8183-mdp-exto";
+			mdp-comp-ids = <0 1>;
+			reg = <0 0x15020000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1502XXXX 0 0x1000>;
+			#clock-cells = <1>;
+		};
-- 
2.18.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux