Add pinctrl node for Actions Semi S500 SoC.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>
---
arch/arm/boot/dts/owl-s500.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
index 449e9807c4ec..b16172615db0 100644
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ b/arch/arm/boot/dts/owl-s500.dtsi
@@ -6,6 +6,7 @@
*/
#include <dt-bindings/clock/actions,s500-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/owl-s500-powergate.h>
#include <dt-bindings/reset/actions,s500-reset.h>
@@ -208,6 +209,25 @@ sps: power-controller@b01b0100 {
#power-domain-cells = <1>;
};
+ pinctrl: pinctrl@b01b0000 {
+ compatible = "actions,s500-pinctrl";
+ reg = <0xb01b0000 0x40>, /* GPIO */
+ <0xb01b0040 0x10>, /* Multiplexing Control */
+ <0xb01b0060 0x18>, /* PAD Control */
+ <0xb01b0080 0xc>; /* PAD Drive Capacity */
+ clocks = <&cmu CLK_GPIO>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 132>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* GPIOA */
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* GPIOB */
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* GPIOC */
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, /* GPIOD */
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; /* GPIOE */
+ };
+
dma: dma-controller@b0260000 {
compatible = "actions,s500-dma";
reg = <0xb0260000 0xd00>;
--
2.29.2
