This adds device tree bindings for the Yamaha YAS5xx magnetometers/compass sensors. Cc: devicetree@xxxxxxxxxxxxxxx Cc: phone-devel@xxxxxxxxxxxxxxx Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- I am still working on the actual driver for the magnetometer but why not send out the DT bindings for review, the hardware variants are easy to describe. --- .../bindings/iio/magnetometer/yamaha,yas.yaml | 80 +++++++++++++++++++ 1 file changed, 80 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas.yaml diff --git a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas.yaml b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas.yaml new file mode 100644 index 000000000000..6fc4cfe4a417 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/magnetometer/yamaha,yas.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Yamaha YAS5xx magnetometer sensors + +maintainers: + - Linus Walleij <linus.walleij@xxxxxxxxxx> + +description: + The Yamaha YAS5xx magnetometers is a line of 3-axis magnetometers + first introduced by Yamaha in 2006 with the YAS529. Over the years + this magnetometer has been minatyrized and appeared in a number of + different variants. + +properties: + compatible: + oneOf: + - enum: + - yamaha,yas529 + - yamaha,yas530 + - yamaha,yas532 + - yamaha,yas533 + - yamaha,yas535 + - yamaha,yas536 + - yamaha,yas537 + - yamaha,yas539 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: The YAS5xx sensors has a RSTN pin used to reset + the logic inside the sensor. This GPIO line should connect + to that pin and be marked as GPIO_ACTIVE_LOW. + + interrupts: + maxItems: 1 + description: Interrupt for INT pin for variants that support + interrupt generation. This polarity, whether the interrupt + is active on the rising or the falling edge, is configurable + in the hardware. + + vdd-supply: + description: An optional regulator providing core power supply + on the VDD pin, typically 1.8 V or 3.0 V. + + iovdd-supply: + description: An optional regulator providing I/O power supply + for the I2C interface on the IOVDD pin, typically 1.8 V. + This is not present on all variants of the component, some + have only the VDD voltage. + + mount-matrix: + description: An optional 3x3 mounting rotation matrix. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@2e { + compatible = "yamaha,yas530"; + reg = <0x2e>; + vdd-supply = <&ldo1_reg>; + iovdd-supply = <&ldo2_reg>; + reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; + }; + }; -- 2.26.2
