Use the common larb-port header in the source code.
Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
---
drivers/iommu/mtk_iommu.c | 7 -------
drivers/iommu/mtk_iommu.h | 1 +
drivers/memory/mtk-smi.c | 1 +
include/soc/mediatek/smi.h | 2 --
4 files changed, 2 insertions(+), 9 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index c072cee532c2..6451d83753e1 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -103,13 +103,6 @@
#define MTK_PROTECT_PA_ALIGN 256
-/*
- * Get the local arbiter ID and the portid within the larb arbiter
- * from mtk_m4u_id which is defined by MTK_M4U_ID.
- */
-#define MTK_M4U_TO_LARB(id) (((id) >> 5) & 0xf)
-#define MTK_M4U_TO_PORT(id) ((id) & 0x1f)
-
#define HAS_4GB_MODE BIT(0)
/* HW will use the EMI clock if there isn't the "bclk". */
#define HAS_BCLK BIT(1)
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index df32b3e3408b..d0c93652bdbe 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -17,6 +17,7 @@
#include <linux/spinlock.h>
#include <linux/dma-mapping.h>
#include <soc/mediatek/smi.h>
+#include <dt-bindings/memory/mtk-smi-larb-port.h>
#define MTK_LARB_COM_MAX 8
#define MTK_LARB_SUBCOM_MAX 4
diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 691e4c344cf8..a02ce091005d 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -14,6 +14,7 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <soc/mediatek/smi.h>
+#include <dt-bindings/memory/mtk-smi-larb-port.h>
#include <dt-bindings/memory/mt2701-larb-port.h>
/* mt8173 */
diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h
index 5a34b87d89e3..9371bf572ab8 100644
--- a/include/soc/mediatek/smi.h
+++ b/include/soc/mediatek/smi.h
@@ -11,8 +11,6 @@
#ifdef CONFIG_MTK_SMI
-#define MTK_LARB_NR_MAX 16
-
#define MTK_SMI_MMU_EN(port) BIT(port)
struct mtk_smi_larb_iommu {
--
2.18.0
