On 11/3/20 6:38 PM, Atish Patra wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > On Tue, Nov 3, 2020 at 10:19 AM <Cyril.Jean@xxxxxxxxxxxxx> wrote: >> On 11/3/20 10:00 AM, Bin Meng wrote: >>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe >>> >>> On Fri, Oct 30, 2020 at 5:08 PM Anup Patel <anup@xxxxxxxxxxxxxx> wrote: >>>> On Thu, Oct 29, 2020 at 4:58 AM Atish Patra <atish.patra@xxxxxxx> wrote: >>>>> Add initial DTS for Microchip ICICLE board having only >>>>> essential devcies (clocks, sdhci, ethernet, serial, etc). >>>>> >>>>> Signed-off-by: Atish Patra <atish.patra@xxxxxxx> >>>>> --- >>>>> arch/riscv/boot/dts/Makefile | 1 + >>>>> arch/riscv/boot/dts/microchip/Makefile | 2 + >>>>> .../microchip/microchip-icicle-kit-a000.dts | 313 ++++++++++++++++++ >>>> I suggest we split this DTS into two parts: >>>> 1. SOC (microchip-polarfire.dtsi) >>>> 2. Board (microchip-icicle-kit-a000.dts) >>> I also doubt what is the correct board name. I suspect the -a000 comes >>> from the SiFive board name convention, but does not apply to the >>> Icicle Kit board. >>> >>> @Cyril, please confirm. >>> >> Correct. Sorry Padmarao, I missed that one. >> > Ok. I picked that one from U-Boot. What should be the correct board > name in that case ? > > microchip-pfsoc-icicle-kit ? My preference would go for microchip-mpfs-icicle-kit. I prefer "mpfs" over "pfsoc" as "mpfs" is the part number prefix for the PolarFire SoC device family. Regards, Cyril.
