[PATCH] arm64: dts: qcom: sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The trogdor design has two options for supplying the pp3300_hub power rail,
it can be supplied by pp3300_l7c or pp3300_a. Initially pp3300_l7c was
used, newer revisions (will) use pp3300_a as supply.

Add a DT node for the pp3300_a path which includes a power switch that is
controlled by a GPIO. Make this path the default and keep trogdor rev1,
lazor rev0 and rev1 on pp3300_l7c.

Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---

 .../boot/dts/qcom/sc7180-trogdor-lazor-r0.dts |  4 +++
 .../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts |  4 +++
 .../arm64/boot/dts/qcom/sc7180-trogdor-r1.dts |  4 +++
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi  | 30 ++++++++++++++++++-
 4 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
index ae4c23a4fe65..08bf30b761fc 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
@@ -22,3 +22,7 @@ &sn65dsi86_out {
 	 */
 	lane-polarities = <1 0>;
 };
+
+&usb_hub {
+	vdd-supply = <&pp3300_hub_7c>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
index 3151ae31c1cc..9f7a44d78a1a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
@@ -13,3 +13,7 @@ / {
 	model = "Google Lazor (rev1+)";
 	compatible = "google,lazor", "qcom,sc7180";
 };
+
+&usb_hub {
+	 vdd-supply = <&pp3300_hub_7c>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
index 0a281c24841c..e1840fe07cd0 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -62,6 +62,10 @@ &sdhc_2 {
 	status = "okay";
 };
 
+&usb_hub {
+	 vdd-supply = <&pp3300_hub_7c>;
+};
+
 /* PINCTRL - board-specific pinctrl */
 
 &tlmm {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index bf875589d364..2d64e75a2d6d 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -174,6 +174,21 @@ pp3300_fp_tp: pp3300-fp-tp-regulator {
 		vin-supply = <&pp3300_a>;
 	};
 
+	pp3300_hub: pp3300-hub {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_hub";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_hub>;
+
+		vin-supply = <&pp3300_a>;
+	};
+
 	/* BOARD-SPECIFIC TOP LEVEL NODES */
 
 	backlight: backlight {
@@ -469,7 +484,7 @@ ppvar_l6c: ldo6 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		pp3300_hub:
+		pp3300_hub_7c:
 		pp3300_l7c: ldo7 {
 			regulator-min-microvolt = <3304000>;
 			regulator-max-microvolt = <3304000>;
@@ -1151,6 +1166,19 @@ pinconf {
 		};
 	};
 
+	en_pp3300_hub: en-pp3300-hub {
+		pinmux {
+			pins = "gpio84";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio84";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
 	en_pp3300_dx_edp: en-pp3300-dx-edp {
 		pinmux {
 			pins = "gpio30";
-- 
2.29.1.341.ge80a0c044ae-goog




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux