Re: [PATCH v7 0/6] Exynos: Simple QoS for exynos-bus using interconnect

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sylwester,

When I tested this patchset on Odroid-U3,
After setting 0 bps by interconnect[1][2],
the frequency of devfreq devs sustain the high frequency
according to the pm qos request.

So, I try to find the cause of this situation.
In result, it seems that interconnect exynos driver
updates the pm qos request to devfreq device
during the kernel booting. Do you know why the exynos
interconnect driver request the pm qos during probe
without the mixer request?

PS. The passive governor has a bug related to PM_QOS interface.
So, I posted the patch[4].


[1] interconnect_graph
root@localhost:~# cat /sys/kernel/debug/interconnect/interconnect_graph 
digraph {
        rankdir = LR
        node [shape = record]
        subgraph cluster_1 {
                label = "soc:bus_dmc"
                "2:bus_dmc" [label="2:bus_dmc
                        |avg_bw=0kBps
                        |peak_bw=0kBps"]
        }
        subgraph cluster_2 {
                label = "soc:bus_leftbus"
                "3:bus_leftbus" [label="3:bus_leftbus
                        |avg_bw=0kBps
                        |peak_bw=0kBps"]
        }
        subgraph cluster_3 {
                label = "soc:bus_display"
                "4:bus_display" [label="4:bus_display
                        |avg_bw=0kBps
                        |peak_bw=0kBps"]
        }
        "3:bus_leftbus" -> "2:bus_dmc"
        "4:bus_display" -> "3:bus_leftbus"


[2] interconnect_summary
root@localhost:~# cat /sys/kernel/debug/interconnect/interconnect_summary 
 node                                  tag          avg         peak
--------------------------------------------------------------------
bus_dmc                                               0            0
  12c10000.mixer                         0            0            0
bus_leftbus                                           0            0
  12c10000.mixer                         0            0            0
bus_display                                           0            0
  12c10000.mixer                         0            0            0


[3] devfreq_summary
root@localhost:~# cat /sys/kernel/debug/devfreq/devfreq_summary 
dev                            parent_dev                     governor        timer      polling_ms  cur_freq_Hz  min_freq_Hz  max_freq_Hz
------------------------------ ------------------------------ --------------- ---------- ---------- ------------ ------------ ------------
soc:bus_dmc                    null                           simple_ondemand deferrable         50    400000000    400000000    400000000
soc:bus_acp                    soc:bus_dmc                    passive         null                0    267000000    100000000    267000000
soc:bus_c2c                    soc:bus_dmc                    passive         null                0    400000000    100000000    400000000
soc:bus_leftbus                null                           simple_ondemand deferrable         50    200000000    200000000    200000000
soc:bus_rightbus               soc:bus_leftbus                passive         null                0    200000000    100000000    200000000
soc:bus_display                soc:bus_leftbus                passive         null                0    200000000    200000000    200000000
soc:bus_fsys                   soc:bus_leftbus                passive         null                0    134000000    100000000    134000000
soc:bus_peri                   soc:bus_leftbus                passive         null                0    100000000     50000000    100000000
soc:bus_mfc                    soc:bus_leftbus                passive         null                0    200000000    100000000    200000000


[4] PM / devfreq: passive: Update frequency when start governor
https://patchwork.kernel.org/project/linux-pm/patch/20201103070646.18687-1-cw00.choi@xxxxxxxxxxx/


On 10/30/20 9:51 PM, Sylwester Nawrocki wrote:
> 
> This patchset adds interconnect API support for the Exynos SoC "samsung,
> exynos-bus" compatible devices, which already have their corresponding
> exynos-bus driver in the devfreq subsystem.  Complementing the devfreq
> driver with an interconnect functionality allows to ensure the QoS
> requirements of devices accessing the system memory (e.g. video processing
> devices) are fulfilled and aallows to avoid issues like the one discussed
> in thread [1].
> 
> This patch series adds implementation of the interconnect provider per each
> "samsung,exynos-bus" compatible DT node, with one interconnect node per
> provider.  The interconnect code which was previously added as a part of
> the devfreq driver has been converted to a separate platform driver.
> In the devfreq a corresponding virtual child platform device is registered.
> Integration of devfreq and interconnect frameworks is achieved through
> the PM QoS API.
> 
> A sample interconnect consumer for exynos-mixer is added in patches 5/6,
> 6/6, it is currently added only for exynos4412 and allows to address the
> mixer DMA underrun error issues [1].
> 
> Changes since v6:
>  - the interconnect consumer DT bindings are now used to describe dependencies
>    of the interconnects (samsung,exynos-bus nodes),
>  - bus-width property replaced with samsung,data-clk-ratio,
>  - adaptation to recent changes in the interconnect code
>    (of_icc_get_from_provider(), icc_node_add()).
> 
> The series has been tested on Odroid U3 board. It is based on v5.10-rc1.
> 
> --
> Regards,
> Sylwester
> 
> 
> Changes since v5:
>  - addition of "bus-width: DT property, which specifies data width
>    of the interconnect bus (patches 1...2/6),
>  - addition of synchronization of the interconnect bandwidth setting
>    with VSYNC (patch 6/6).
> 
> Changes since v3 [4] (v4 skipped to align with patchset [1]), detailed
> changes are listed in each patch:
>  - conversion to a separate interconnect (platform) driver,
>  - an update of the DT binding documenting new optional properties:
>    #interconnect-cells, samsung,interconnect-parent in "samsung,exynos-bus"
>    nodes,
>  - new DT properties added to the SoC, rather than to the board specific
>    files.
> 
> Changes since v2 [5]:
>  - Use icc_std_aggregate().
>  - Implement a different modification of apply_constraints() in
>    drivers/interconnect/core.c (patch 03).
>  - Use 'exynos,interconnect-parent-node' in the DT instead of
>    'devfreq'/'parent', depending on the bus.
>  - Rebase on DT patches that deprecate the 'devfreq' DT property.
>  - Improve error handling, including freeing generated IDs on failure.
>  - Remove exynos_bus_icc_connect() and add exynos_bus_icc_get_parent().
> 
> Changes since v1 [6]:
>  - Rebase on coupled regulators patches.
>  - Use dev_pm_qos_*() API instead of overriding frequency in
>    exynos_bus_target().
>  - Use IDR for node ID allocation.
>  - Reverse order of multiplication and division in
>    mixer_set_memory_bandwidth() (patch 07) to avoid integer overflow.
> 
> 
> References:
> [1] https://patchwork.kernel.org/patch/10861757/ (original issue)
> [2] https://protect2.fireeye.com/v1/url?k=383efc40-67a5c559-383f770f-000babff3793-a505fcd0b7477e5e&q=1&e=ad8ffb9f-f90b-49a7-a3df-2ab066a8c4ee&u=https%3A%2F%2Fwww.spinics.net%2Flists%2Flinux-samsung-soc%2Fmsg70014.html
> [3] https://protect2.fireeye.com/v1/url?k=13f0c488-4c6bfd91-13f14fc7-000babff3793-98a59bf1c5c6f1fb&q=1&e=ad8ffb9f-f90b-49a7-a3df-2ab066a8c4ee&u=https%3A%2F%2Fwww.spinics.net%2Flists%2Farm-kernel%2Fmsg810722.html
> [4] https://lore.kernel.org/linux-pm/20191220115653.6487-1-a.swigon@xxxxxxxxxxx
> [5] https://patchwork.kernel.org/cover/11054417/ (v1 of this RFC)
> [6] https://patchwork.kernel.org/cover/11152595/ (v2 of this RFC)
> 
> 
> Artur Świgoń (1):
>   ARM: dts: exynos: Add interconnects to Exynos4412 mixer
> 
> Sylwester Nawrocki (5):
>   dt-bindings: devfreq: Add documentation for the interconnect
>     properties
>   interconnect: Add generic interconnect driver for Exynos SoCs
>   PM / devfreq: exynos-bus: Add registration of interconnect child
>     device
>   ARM: dts: exynos: Add interconnect properties to Exynos4412 bus nodes
>   drm: exynos: mixer: Add interconnect support
> 
>  .../devicetree/bindings/devfreq/exynos-bus.txt     |  68 ++++++-
>  arch/arm/boot/dts/exynos4412.dtsi                  |   7 +
>  drivers/devfreq/exynos-bus.c                       |  17 ++
>  drivers/gpu/drm/exynos/exynos_mixer.c              | 146 ++++++++++++++-
>  drivers/interconnect/Kconfig                       |   1 +
>  drivers/interconnect/Makefile                      |   1 +
>  drivers/interconnect/exynos/Kconfig                |   6 +
>  drivers/interconnect/exynos/Makefile               |   4 +
>  drivers/interconnect/exynos/exynos.c               | 198 +++++++++++++++++++++
>  9 files changed, 438 insertions(+), 10 deletions(-)
>  create mode 100644 drivers/interconnect/exynos/Kconfig
>  create mode 100644 drivers/interconnect/exynos/Makefile
>  create mode 100644 drivers/interconnect/exynos/exynos.c
> 
> --
> 2.7.4
> 
> 
> 


-- 
Best Regards,
Chanwoo Choi
Samsung Electronics



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux