On Tue, Nov 03, 2020 at 01:23:12AM +0000, Joakim Zhang wrote:
>
> > -----Original Message-----
> > From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> > Sent: 2020年11月2日 16:29
> > To: Joakim Zhang <qiangqing.zhang@xxxxxxx>
> > Cc: shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx; festevam@xxxxxxxxx;
> > dl-linux-imx <linux-imx@xxxxxxx>; devicetree@xxxxxxxxxxxxxxx;
> > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> > mkl@xxxxxxxxxxxxxx
> > Subject: Re: [PATCH V2] arm64: dts: imx8mp-evk: add CAN support
> >
> > On Mon, Nov 02, 2020 at 10:16:34AM +0800, Joakim Zhang wrote:
> > > Add CAN device node and pinctrl on i.MX8MP evk board.
> > >
> > > Signed-off-by: Joakim Zhang <qiangqing.zhang@xxxxxxx>
> > > ---
> > > ChangeLogs:
> > > V1->V2:
> > > * add missing space before '=',
> > > fsl,clk-source= /bits/ 8 <0> -> fsl,clk-source = /bits/ 8 <0>
> > > ---
> > > arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 62
> > ++++++++++++++++++++
> > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 30 ++++++++++
> > > 2 files changed, 92 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > > b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > > index 908b92bb4dcd..b10dce8767a4 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > > @@ -33,6 +33,28 @@
> > > <0x1 0x00000000 0 0xc0000000>;
> > > };
> > >
> > > + reg_can1_stby: regulator-can1-stby {
> > > + compatible = "regulator-fixed";
> > > + regulator-name = "can1-stby";
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_flexcan1_reg>;
> > > + regulator-min-microvolt = <3300000>;
> > > + regulator-max-microvolt = <3300000>;
> > > + gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
> > > + enable-active-high;
> > > + };
> > > +
> > > + reg_can2_stby: regulator-can2-stby {
> > > + compatible = "regulator-fixed";
> > > + regulator-name = "can2-stby";
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_flexcan2_reg>;
> > > + regulator-min-microvolt = <3300000>;
> > > + regulator-max-microvolt = <3300000>;
> > > + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
> > > + enable-active-high;
> > > + };
> > > +
> > > reg_usdhc2_vmmc: regulator-usdhc2 {
> > > compatible = "regulator-fixed";
> > > pinctrl-names = "default";
> > > @@ -45,6 +67,20 @@
> > > };
> > > };
> > >
> > > +&flexcan1 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_flexcan1>;
> > > + xceiver-supply = <®_can1_stby>;
> > > + status = "okay";
> > > +};
> > > +
> > > +&flexcan2 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_flexcan2>;
> > > + xceiver-supply = <®_can2_stby>;
> > > + status = "disabled";/* can2 pin conflict with pdm */ };
> > > +
> > > &fec {
> > > pinctrl-names = "default";
> > > pinctrl-0 = <&pinctrl_fec>;
> > > @@ -144,6 +180,32 @@
> > > >;
> > > };
> > >
> > > + pinctrl_flexcan1: flexcan1grp {
> > > + fsl,pins = <
> > > + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154
> > > + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154
> > > + >;
> > > + };
> > > +
> > > + pinctrl_flexcan2: flexcan2grp {
> > > + fsl,pins = <
> > > + MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154
> > > + MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154
> > > + >;
> > > + };
> > > +
> > > + pinctrl_flexcan1_reg: flexcan1reggrp {
> > > + fsl,pins = <
> > > + MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x154 /*
> > CAN1_STBY */
> > > + >;
> > > + };
> > > +
> > > + pinctrl_flexcan2_reg: flexcan2reggrp {
> > > + fsl,pins = <
> > > + MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x154
> > /* CAN2_STBY */
> > > + >;
> > > + };
> > > +
> > > pinctrl_gpio_led: gpioledgrp {
> > > fsl,pins = <
> > > MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > index 479312293036..ecccfbb4f5ad 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > @@ -552,6 +552,36 @@
> > > status = "disabled";
> > > };
> > >
> > > + flexcan1: can@308c0000 {
> > > + compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan";
> >
> > Undocumented compatible in
> > Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
>
> Hi Krzsztof,
>
> Yes, I will resend the patch after below patch goes into mainline. Thanks.
> https://www.spinics.net/lists/linux-can/msg04896.html
Thanks for the link. It's all good and there is no need to resend
because your compatible is mentioned there.
Best regards,
Krzysztof
